Im a surveying student and chosen to do roof peak survey for solar panel installations as my final project.How best can I be assisted in carrying out the survey.
This Content Originally Published by a land surveyor to Land Surveyors United Network
I found abunch of information here
A Site Survey is done after the preliminary conversation over phone call. This is the best chance to show them your quality, knowledge and good service and convert them by doing a professional site survey.
What exactly is a Site Survey?
A Site Survey is done to collect information about various aspects such as local conditions, physical details of the site (including the roof) and the consumer’s power consumption needs. Some of the information collected is:
Site surveys are often done manually by skilled manpower, on the basis of which a 3D model of the site is prepared, which is used for the system design. A site survey consists of an inspection of the area of installation of solar panels to see if the proposed site is suitable. As a solar installer, when checking a potential site, you will primarily check for whether the roof will be able to support the extra load of the solar system, and if during peak hours there is no shade obstructing the panels.
So Why is it Crucial?
While considering installing solar, the site proposed by the customer could be a site the customer is well acquainted with, but you aren’t. However, as an installer, you need to possess key information regarding the site. The information that you accumulate through a site survey should cover all the aspects of the location that influence the solar installation at that particular location.
The main objectives of a site survey are:
For example, a software based shading analysis of the site can save losses incurring due to inefficient generation. Even a little bit of shade can significantly affect the output and efficiency of a solar power system. Electrically, most PV panels are divided into 3 ‘zones’. If you get shading on just one of those zones then the effect isn’t as bad; however, even partially shading three zones together can lead to a reduction in output of up to 60%. Worse still is if the shading affects both zones at once, for example shading the bottom of the panel. In these cases, even just shading the bottom row of cells would reduce the total power output of the panel by 90-95% of the entire string!
Hence it is crucial to assess the site for all necessary criteria before the installation is done.
What are these criteria?
Let’s say that now you, an installer, have a project in hand and are ready to perform a site survey, there are certain parameters that you absolutely need to cover. Here is a list of this essential criteria and why you need them:
Copies of recent electricity bills from consumers are also requested
Ensure that all of this data is provided for each roof, if there are multiple roofs for a site.
The above data is enough for a RCC roof, which is common across residential and commercial segments.
If the roof considered is a sheet roof, then:
A photo can be taken of the following electrical things of the roof for analysis.
Some additional factors that installers must keep in mind:
Along with the given points, it is critical that you should consider the following points too:
1.If the roof can sustain that much additional weight?
In case your roof is old, needs repair etc, ensure it is checked before the installation of the PV installation. Also make the choice roof mounting and roof integration.
2. If there are shaded areas that fall on the solar array during hours of maximum of sunlight i.e. 9 am to 4 pm?
Consider the influence of surrounding obstacles such as buildings, neighbouring roofs, chimneys, pipes, trees, hills (natural landmasses etc). Also the length of the shadowduring different times of the day and different seasons (winter and summer) is also to be considered. This is arguably the easiest thing to do using software, but one that most installers get wrong. You can convince roof-owners using shadow simulations and show them how the system will actually generate electricity.
3. Is the solar array easily accessible for maintenance purposes?
Ensure that the array is accessible enough for maintaining and installation. In addition to that make sure that you don’t over utilise the roof area available as that will increase the wind loading of the roof at the edges and not leave space for fire fighters to enter in case of a fire. Note whether the roof is accessible from inside the building, has a ladder attached, or an there is a need for an external ladder.
4. If you’ve chosen the correct orientation and tilt of the panels?
As an installer you must consider the output obtained on average through the year, maximum during the summers and winters. Ensure that if the site is in the northern hemisphere then the roof chosen is one facing the south, and vice versa. To get average yield throughout the year your solar panels should be tilted to an angle equal to the latitude (in degrees) of your location. In order to get maximum yield in winter your solar panels should be tilted to an angle equal to the latitude of your location minus 15 degrees, and similarly maximum yield in summer your solar panels should be tilted to an angle equal to the latitude of your location plus 15 degrees.
5. If you have chosen to mount the panels correctly?
If you choose to mount the panels, ensure you select fitting the conditions mentioned above (orientation, shading etc). In addition to that, consider factors such as there is room provided beneath them to ensure cooling, if it is ground mounting to check the kind of soil, and all necessary construction regulations are complied with.
The following are the kinds of mounting:
6. Where will the other the components of the system will be situated?
Utilize the site survey to decide location of various components like Inverter, Batteries, DC combinator box, AC distribution box etc. Figure out how far the array will be from the other system constituents. Try to minimise the length of the DC cables between the array and the inverter. Make sure the location is such that the customers can protect the system and the components from theft and vandalism.
7. What is a solar tracker and how can it be used?
A solar tracker is a device which follows the position and the movement of the sun across the sky and ensures maximum collection of solar energy by the panels. This can boost the average energy of the panels significantly. Though trackers consume extra power, there is not much additional maintenance cost. Installers are recommended trackers particularly if there is limited space for the array and the consumer wants to extract maximum power from it.
8. What is the relation between the present electrical system in the building and the solar array?
Through the site survey, you must also gain an understanding of whether the solar panels will connect to the grid. In case of grid-direct systems, the orientation and tilt angle of the solar array is usually in line with roof orientation and slope. As mentioned earlier, the consumer’s current electricity usage should also be noted.
What The Solar Labs has to offer
Surveys can be done either in person or virtually for simpler sites. Most companies now prefer to use virtual methods for the initial feasibility analysis since it can provide a great estimate by the use of satellite imaging and save on time.
Here at TSL, we use of proprietary software that generates a 3D render of the potential area of installation. These renders are created through satellite imaging from Google Maps & ISRO Satellites and it enables us to design accurate systems optimised for the particular area. The 3D renders assist us in finding any possible obstacles in the area of installation that could cause shadows and after simulating the sun movement around the area, we are able to find the ideal location for the solar panels.
Thus, through the use of technology, we are able to ease the whole process of surveying and simplify your consumer’s transition to solar power.
Hence, the site survey aims to provide you with key information, and when combined with the consumers requirements, it is what decides the final proposal that will be drafted by you.