Leica GS15 Firmware

Is anyone still have the 5.05 firmware version of GS10/15?

My CS15 is on 5.05, but my GS15 is on 5.02, and cn'a get connected each other, because of different firmware version.
Unfortunately i have no budget to buy the ccp's.

Read more…

downloading static data from Leica GS08plus

Does any one know how to download static data from a Leica GS08 Plus receiver it does not have an SD card but it has blooth and a lemo to lemo cable, and its operated by a leica CS15 controller. On my Trimble and other GNSS im used to i can download

Read more…

geiod

Anyone is familiar with Leica Geiod Reader?

Read more…

GPS 530 LEICA

Hi every body

I have 2 GPS 530 Leica.But one of them do not give enough satellite  for fixing.And i set up firmware 5.1 and i changed Antenna but again did not give more than 4 satellite.Please tell me how can i do.

THANKS.

Read more…

Leica Sr530 error code 4

Hi Guys, I'm Jesaya Hakanyome a Surveyors in Namibia.  I have been using leica 500 for 3 years now bu today when I tried to do a calibration a get an error 4 when trying to save the coordinates system.  Any idea of what error  4 means 

 

Read more…

Need Short focus lenses for WildT2 Theodolite

• Dear Sir
• Greetings.
• We need short focus lenses viz.,GVO1,GVO2,GBO3and GVO4 for Wild T2 theodolite
• Please inform us if you have anybody we will butu email:[email protected]

Read more…

Introduction

I am Mohammad Shoaib Afzali from Kbaul, Afghanistan , and Bachelor of Geodesy Engineering Faculty of Kabul Polytechnic university , and currently works as survey manager in National rural acccess program of Ministry of Rural Rehabilitation and develo

Read more…

leica tcr407 firmware

I  have a Leica tcr407 total station and would like some insight as well as an older firmware version.  I made a boo-boo and used wrong class when uploading and my machine is giving weak signal error 6.  eica said maybe upload a different version of

Read more…

TPS1100 Software

Hello Everyone,

Does anyone have the reffernce line software for my relible old TPS1100?

Thanks 

Maciej

Read more…

Help with Captivate

How do i remove the range?

 

Read more…

How to import Railway alignment data to Total station TS16?

Dear everybody,

It's nice to be a part of your 4rum.

Firstly, I would like to introduce with you I am Hieu, Survey Manager of Hitachi Railway Line 1 in Ho Chi Minh City in Vietnam. Our company has just bought the TS16P 1" for my Survey Team, unfortunat

Read more…

TS06 Newbe Question

Hello, I just purchased a Lieca TS06 Plus and unboxed it.  I am used to older Topcon total stations that have  horizontal and vertical locking knobs that serve to either lock the horizontal/vertical movement and also finely turn the total station.

The

Read more…

PDL GFU15 Modem list in GX1230 Receiver

Hi guys
Can any help me for adding PDL GFU15 Modem list in GX1230 Receiver ??
Thanks For ALL

Read more…

TPS1100 CODELIST

Hello my friends.

Is there anyway to convert TPS1200 CODELIST .OCE to a TPS1100 CODELIST  .Frt?

Read more…

Load parameter to TPS1100

Hey guys.

How do you edit the parameters file so I could customise it before I load it (.par) to my TPS11OO?

Read more…

Survey Data Miss match

Hey Surveyors!

I have surveyed a land about km square with complected details(roads, streets, buildings, T-Walls, Manholes, Corners etc) but with no traverse extension at the first, now when i have completed it and reached to the first area I was star

Read more…

Leica CS20

Anybody can help me with adding background images into the Leica CS20 handheld?

Read more…

RTK Leica GX1230 with GFU7(Siemens M20)

Am trying to use the old fashioned RTK with GSM. I use a GX1230 with Siemens M20 (GX1230 Tech Ref Manual lists M20 as a supported model). Connected the M20 to Port1, configured the Real Time Interface with Port1 and Siemens M20 that shows up by defau

Read more…

Weark Signal Error 1292 in Leica TPS 407

Greetings to all Surveyors around the world,

I have been have this problem with my Leica TPS 407 Total Station when I try to take measurements, It displays 'Weak Signal Error 1292'. I have even change New Battery and tried different Prism but still It

Read more…

Leica TS15 Robotic not exporting surveyed point names on DXF file when opened in AutoCAD

Hi all,

I have recently hired a Leica TS15 Robotic total station and all is going well. However, when I go to export my surveyed points to a memory stick as a DXF file and open that DXF file in AutoCAD, my points do not display the name that I assigne

Read more…