Hi,
I'am a Leica user and normally I use TPS1200 and Viva series instruments.
For various reason I must perform I survey with a TCR407+.
Actually I can download data in ASCII, dxf and IDX format. I try to elaborate the data(station point and orientation) with LGO, but I need the raw data from the station (I see on station that all data are recorded in the station momory) someone know how to download the data?
In Viva series I use DBX database.
Thank you so much.
Emanuele
You need to be a member of Land Surveyors United - Surveying Education Community to add thoughts!
Add Posts, Surveying Photos, Videos and Articles to the Surveyor Community
Add Stuff to Community
We are committed to allowing freedom of expression for all of our members, and that includes maintaining a safe space for people with opposing views to express themselves. We get posts from all over the country and even the globe, so needless to say, people come with different viewpoints on lad surveying practices and processes. We see this diversity and variety as a real strength-- dialogue and debate are an integral part of the educational process, as well as an important tool in exploring different sides of complex issues.
Replies
Hi Emanuele
You have to download via cable with USB in the 'leica geo office tools' the GSI file. This file content the raw data that can be opened in any text file.
hi dear first you should check cam information baudrate and so same with LGO,second you should install cable driver and c++ and netframework pre installation softwares aswell.simply you can export your idx or ascii.
goodluck
Buongiorno Emanuele
You can download Leica's TPS400 data in GSI format. The standard GSI FRT on board doesn't contain all kind of data (e.g. instrumental height …), so it's better use the LW300 (or similar) format. It's complaint with all softwares. If You need the FRT file, ask to me here.
La serie TCR407 scarica dati direttamente in formato GSI (è possibile comunque creare un formato FRT in LGO per adattare l'export).
Con il formato GSI standard dello strumento alcuni dati si perdono (ad esempio, l'altezza strumentale).
Conviene utilizzare un formato più simile possibile al vecchio LW300 (quello del Leica WinDriver).
In questo modo ci sarà la definizione della stazione completa e anche la codifica dei punti battuti.
Se ti serve il file di formato per esportare un GSI compatibile con i diversi software, scrivimi pure qui in bacheca (e, se vuoi, specifica il software che stai usando).
Bye!
Buon lavoro
Carlo Alberto
Hi Carlo Alberto,
Yes, the problem is exacly that I lost the setup data. If is possible I would like change station position coordinate.
Ciao,
il problema è proprio che il file GSI mi perde i parametri che mi permettono di operare nella finestra TPS processing. Essenzialmente vorrei cambiare le coordinate della stazione (ho lavorato pensando che avrei avuto un punto in LGO che rappresenta la stazione, invece ho solo i punti battuti).
Potresti farmi avere il file da caricare sulla stazione? Non è urgente avrò accesso alla 407 solo a fine agosto tornando in Turchia.
Grazie.
Emanuele
Ciao Emanuele
If You are using LGO Tools, it can't recompute the point coordinates. It needs a licensed LGO with dongle ... or You may use an old WinDriver! In this case, pls upload the attached FRT file in your TCR407 before download the job data.
Se puoi usare solo LGO Tools non ricalcolerai le coordinate dei punti. Ti serve una versione licenziata di LGO (quella con chiave hardware). Rimanendo in ambito Leica, se hai la possibilità di scaricarti il WinDriver (era scritto per Win98, ma funziona bene ancora fino a Win7) puoi utilizzare il formato LW300 che ti allego. WinDriver ti genera anche il DXF dei punti battuti. Se non trovi il programma mandami un PM così ti invio il link dal GoogleDrive.
Bye
Carlo Alberto
LW300.frt
From 1220 I take the CF card and copy directly the data on PC without download from LGO
With the 705 you could use 'leica geo office tools' if you can find it. LGO might do it, I'm not sure. Otherwise hyper terminal is your friend. You will need to set parity, baud rate etc, details should be in the manual.
Hi Emanuele,
I might be not the right person for this topic, because I'm more interested in Trimble but as far as I can remember we exported RAW data from our MS60 at university by exporting the whole job file? But no clue if this works with older total stations as well and we used Leica Infinity for the calculations.
Hope that helps you
Marius