Hello every one
We are working in west Africa and doing international boundary demarcation work between Cameroon- Nigeria. recently we purchase Trimble R10 GPS . we will use this for RTK surveying . I have very limited knowledge on this equipment. I am looking for training on using this equipment . can anyone help me on this.
You need to be a member of Land Surveyors United - Surveying Community & Forums to add thoughts!
Most land surveying related topics are evergreen - meaning the topics of discussion are many times timeless. If you have a question regarding Land Surveying in general, this is the place to ask your questions.
However, if you have a questions regarding a specific type of Land Surveying Equipment, Surveying Software, Land Surveying History or other topics related to land surveying, you will find that our Community Hubs all have dedicated forums. Asking your questions inside these Hub Forums will ensure that you are asking a targeted audience of land surveyors who are following those topics.
Likewise, you will find that all of our Location Based Chapter Hubs have dedicated forums for discussing land surveying topics related to specific locations around the world. Asking your question inside the appropriate place inside the community will most likely get you the most feedback. Enjoy! We look forward to helping you solve your problem or expand your knowledge of land surveying.
Below are the categories for our general forum which spans entire global community.
Replies
I'm From cameroon !
and I'm working at GeoSpace Africa Ltd Who is the Trimble Dealer for West and Central Africa.
this is our web site http://geospaceafrica.com/
This is my phone number +237674109138
At anytime we can help you
We are based in Douala, the Economical Capital of Cameroon.
I hear this all the time, the company or your boss should have asked you first what system you want? Good luck.
I'm From cameroon !
and I'm working at GeoSpace Africa Ltd Who is the Trimble Dealer for West and Central Africa.
this is our web site http://geospaceafrica.com/
This is my phone number +237674109138
At anytime we can help you
We are based in Douala, the Economical Capital of Cameroon.
Dear Mr. Haque,
Depending upon the precision you wish to achieve, the use of an R10 can be very simple. Knowing you are getting the precision desired takes a bit of experience. Depending upon the methods used, GNSS can deliver from a few centimetres to (with very careful work) less than a centimetre horizontally. Much will depend upon preparation, environment, and technique.
You mention an international boundary. This often raises the stakes. What are the requirements from the two governments?
Are you seeking on-site training? In my experience, having an instructor nearby to field idiosyncratic questions and clear them up ono-the-spot is ideal. There are, of course manuals and some web based stuff available.
JAC
Dear JAC
Thank you very much for your reply in fact I looking for training on R 10 . that may any place, However as you mention about course manuals and web base training, can you help me by providing address of that course manual and web address
Thanking you in anticipation
Kazi Haque
I would start by asking your dealer.
Here are some links:
http://www.trimble.com/Survey/TrimbleR10.aspx
http://www.trimble.com/Survey/tsc3.aspx
http://www.trimble.com/gps_tutorial/
https://www.google.com/search?q=Trimble+GNSS+Training&ie=utf-8&...
JAC