Land Surveyor Forum

Replies

• 

  Waluyima Ediriisa August 24, 2016 at 1:22am

  Hello EdJolliffe,

  I noticed that you are working with C3D, i believe autodesk recap could help. You may need to read about it to see how you go about it.

  Ediriisa
• 

  Muhammad Rashid Iqbal August 23, 2016 at 3:07pm

  I do not about the devices.... But once imaginary is there u can use raster image in ACAD and rest making u can do on the drawings
• Land Surveyor

  Ted Link August 23, 2016 at 1:15pm

  Oh & you need the free patch from Leica on line to import the .poe Sorry I left that step out. God Bless !
  • 

    Ed Jolliffe > Ted Link August 23, 2016 at 2:44pm

    What is the patch called and does it get put on Civil3D?
• Land Surveyor

  Ted Link August 23, 2016 at 1:13pm

  Pick the vertices (points) you want & Export a .poe file from your point cloud file & that will give you "nodes" that are going to import in to autodesk civil 3D, then you can set points or create line work with those, since the have X,Y,Z
  • Land Surveyor

    Ted Link > Ted Link August 23, 2016 at 4:06pm

    My mistake it's a.COE file
    • 

      Ed Jolliffe > Ted Link August 23, 2016 at 4:11pm

      Hi Ted,

      Thanks for your comments. I will give this a try. Could I possibly get your contact information? I would love to touch base with you if I have any other questions. I have sent you an associate request.
• 

  makki August 23, 2016 at 12:40pm

  HI,

              WHICH SOFTWARE YOU ARE USING?

  INFINITY OR MICROSURVEY
  • 

    Ed Jolliffe > makki August 23, 2016 at 2:42pm

    I am using Infinity to view and QC the work, however, we have Cyclone, Civil3D and Microsurvey that we are completing the final product return. I'm just not sure if the image taken from the MS-50 can be imported into any of these so that you can have as a background to the scan data. At this point you can create the points required for the return.