Land Surveyor Forum

Replies

• 

  Billy Brooks December 6, 2017 at 4:47pm

   Leica . Had software called TC Tools that is used for TS transfers for those models. Up and down loads.

  I do not know where you could find it . Leica may help.
• Land Surveyor

  joel lechero December 5, 2017 at 12:01am

  Hello,
  I usually open the. Csv file in covadis, then i create a LEICA POINTS file. Then i change the extension of the new file from . Txt to . GSI. Then with the help of the DATA EXCHANGE MANAGER of leica geo office i simply upload the file into the instrument (TCR800). Il take some time and it's done.
• Land Surveyor

  Scott Taylor December 4, 2017 at 7:42pm

  http://surveyequipment.com/assets/index/download/id/212/

  try this link. its a pdf. see pages 156-157. I believe this works with the model you have. If not, call g360 (geomatics 360), in Zachary, LA. Ask for Don Biggs. He bleeds green (leica green). He can answer or get the answer for anything leica.
• Land Surveyor

  Mark Macfarlane December 4, 2017 at 7:11pm

  I haven't used a Leica that old, but I remebmber having to buy a special chord to get the TCRP1100 to work with newer computers, because they do not see the serial port like older ones do, or in my case they didn't have one. You generally have to set up the baud rate and a few other settings to make it happen. You can download a copy of leica geo office tools at leica myworld. You can also try to covert it to an ASCII P,N,E,Z,D. You can do that in word. Good luck with it.

  http://www.cas.umt.edu/migrated/geosciences/faculty/hendrix/G230/G231(2012)/week7/Leica%20TC307%20data%20transferHow%20TO.pdf

  Here is a good tutorial on the Leica Data Transfer utility. Copy and paste the whole link or it won't work.