Land Surveyor Forum

Replies

• 

  Billy Brooks July 21, 2016 at 7:59pm

  Easy ??, Buy a Data Collector, Problem solved !!
• Land Surveyor

  RAYMOND KINGSLY June 29, 2016 at 3:39pm

  manage-jobs-create new job-select the job  you created - then it will return to main screen

   then

  survey-station set up-you can select known res or anything here

  there are two types of jobs in 1203 working job and control job both must be same

  can I know what is the full form TCRP WHAT P STANDS FOR
• 

  Arie Lise, OLS, OLIP, Dipl.T. June 25, 2016 at 7:47am

  I had the option of buying the Leica set of programs or the TDS set. I picked the TDS set which are located on a card I put in the side and loaded up every time I use the machine.
  I think with the Leica set you had to buy additional commands. I lot of these machines I see used on eBay were used for monitoring and probably only have the basic programs.
  I can do some very basic things in the Leica software, but I need to load the TDS off the card to do anything useful.
  • Land Surveyor

    Timothy Watato > Arie Lise, OLS, OLIP, Dipl.T. June 29, 2016 at 3:26pm

    Thank you sir.
• Land Surveyor

  Topographical June 24, 2016 at 5:07pm

  Yes you have to set up the job in Management menu and do the topo in Survey menu. Other tools like stake out and sets of angles are available in programs. I believe you need a CF card inserted to do anything useful though.
  • Land Surveyor

    Timothy Watato > Topographical June 29, 2016 at 3:26pm

    Exactly what I wanted thank you sir.
• 

  Michael Roberts June 24, 2016 at 3:41am

  Hi.

  I had the same problem when i first got my TCRA1105plus, where there didn't seem to be a "Surveying" specific option.

  Just don't select anything from that option menu and go straight to your menu that says something like Data/jobs/measure. I may be wrong on that list of things but you'll know what i mean.

  Select Data Manage or Jobs and then just create a new job and go through your set-up procedures.

  I'm pretty sure (please, anyone correct me if i'm wrong) but the total station will be in "Topo Survey/Surveying" mode by default if no other programme is selected.

  I hope that helps.

  Michael
  • Land Surveyor

    Timothy Watato > Michael Roberts June 24, 2016 at 4:03pm

    Hi Micheal,

    I see what you mean, thank you very much. I will work though it to see how it works.
• Land Surveyor

  TOUHAMI AHMED June 23, 2016 at 8:58pm

  Hello;
  Is easy my friend. Use manage for creat your job or select it. After that enter to survey you orient your machine and start the survey. For more information you can use you tube there is a lotof formation about this.
  • Land Surveyor

    Timothy Watato > TOUHAMI AHMED June 24, 2016 at 4:02pm

    Thank you Touhami,

    I will try it.