### Land Surveying Techniques

Land surveying is one of the world's oldest professions and dates back as far as the ancient Egyptians. In today's guide we shall look at land survey techniques, and how they are used.

## History of Land Survey Techniques

As we mentioned in our introduction, land surveying dates back thousands of years and is an integral part of every major civilization. Ever since the beginning of man, civilizations have had the need to know what property is theirs and understands the shape of the land.

The basics fundamentals of land surveying have not changed since it first began, however the land survey equipment has changed drastically over the years.

In the past, land survey techniques had the right principles, however due to less knowledge and technology they weren't overly accurate or reliable. Modern land survey techniques are incredibly precise largely due to advanced technology available to create the tools used to perform the land survey techniques.

Essentially land survey techniques have remained very much the same - using fundamentals of mathematics including geometry, calculus and trigonometry. It is the tools that have changed.

### Purpose of Different Land Survey Techniques

Land surveying is a very broad subject area and as such not every land survey technique is suitable for every application.

The type of land survey technique they choose to use will depend on a variety of factors. Largely it depends on the type of survey that they are doing. Land surveys can be divided into three basic categories: standard land surveys (fixing property lines, calculate land areas etc.); engineering surveys (ensuring building is constructed in correct place); and informational surveys that are used to create maps and charts.

Land surveys can also be classified as either geodetic surveys or plane surveys. Geodetic surveys are very precise and cover large areas.These require the curvature of the earth to be taken into consideration and require additional land survey techniques such as triangulation, trilateration and astronomical direction fixing.

Plane surveys differ in that they consider the surface of the Earth to be a flat plane, and curvature is not taken into consideration. Techniques for plane surveys include plane trigonometry and plane geometry. These types of land survey techniques are only used in small areas.

Additional sub categories of land surveys that will affect the chosen land survey techniques include: route surveys, property surveys, industrial surveys and hydrographic surveys.

### Land Survey Techniques

There are numerous land survey techniques that are used in the various situations that we mentioned above, however there are five fundamental techniques that are used most commonly among land surveyors: triangulation, trilateration, traverse, leveling and radiation.

Triangulation land survey technique uses series' of connected triangles that join and overlap each other, and from there angles can be measured from determined stations. This is the most commonly used land survey technique and is also very efficient as it minimizes the number of measurements that need to be made.

Trilateration is a land survey technique that uses electronic distance measuring equipment to measure the lengths and sides of the triangles used in triangulation and from there the angles can be calculated. Trilateration is a preferred land survey technique in rough terrain where it can be easier to get accurate calculations than by using the traditional triangulation land survey technique.

Traverse land survey technique uses a series of lines whose distances and lengths have been measured and are connected together by points in determined locations. Traverse lines can be either open or closed and can be adjusted to go around rough terrain or obstacles as required. This land survey technique is commonly used for creating preliminary surveys for the building of new roads.

Leveling is a land survey technique that is used to determine the difference in elevation in a specified area by measuring vertical distances on a graduated rod using a leveling instrument. There are a variety of leveling instruments, howeverĀ  dumpy levels, transits and Theodolites are the preferred option. Using trigonometry the difference in elevation between two points can be established.

The final land survey technique is Radiation.Ā Radiation is a land survey technique that is used most commonly in conjunction with a plane table. Using a fixed position above a ground location various points are taken at the boundary of the survey area. These points are drawn on a piece of paper and the distances measured and converted to the required scale on the survey sheet. Radiation is commonly used with other land survey techniques such as traverse and triangulation.

Ā

Land Surveyor

Charlotte NC Land Surveyor

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

### Featured Land Surveying Articles

Surveying Articles is a place for members to Share Land Surveying related articles, presentations and knowledge with the Land Surveyors United Community. Post or embed articles for future generations of land surveyors.

### Surveying Articles and Presentations

Do you have an article about Land Surveying that you would like to share?

Land Surveying is a timeless art and science and it is therefore, evergreen! You may also know that a lot of older publications have gone away, unfortunately.   If you have written or published land surveying articles in the past, we would be honored for you to share them here with us.  If it is an older article, you can even republish it here with updates and reflections.

class="block"Tip:   If you published an article in the past on one of the older sites which no longer exist, you can use the Wayback Machine to find it.  Then just copy/paste the old article inside a new post here.  Just be sure to tell us where it was previously posted.

Want to embed a PDF Document?

If you have a PDF document or article related to land surveying that you would like to embed inside an article post, simply copy/paste the following code block into the HTML view of the post editor and replace the BOLD part of the code with the URL of the PDF you'd like to embed.

Code to use:

TIP:  You can also upload your PDF using the file upload button and then copy/paste the URL of the document you uploaded with the BOLD part of the code above to get a flippable PDF like so:

Differences between Forums, Blogs and Article posts

Blog Postsdiffer from Forum posts because you can embed and upload different kinds of information.  Blog posts are best for presenting information and updates for feedback and sharing.  When posting a Blog Post, you can also publish a short excerpt at the bottom which is what most members will see before reading the blog post.  Blog posts are also great for posting new surveying projects and digests of links to multiple surveying topics or your own website.   Things that can be embedded into Blog Posts are videos, images, slideshows, powerpoints, spreadsheets, PDFs, documents and more.

Articles are similar to Blog Posts in all ways except one.  Articles allow for you to post an Author Block at the bottom with links to your contact info, website information, credentials, etc. Similar to Blog Posts, things that can be embedded into Blog Posts are videos, images, slideshows, powerpoints, spreadsheets, PDFs, documents and more.  Similar to both types above, Hub Owners can add article sections and features to any hub they control on the community.

### Surveying Jobs

Representing Land Surveyors in 190 Countries
and all 50 US States. Contribute to your local
chapter and promote Land Surveying globally.

Surveyor Hubs

We have members in every region of the planet. Add
your local Land Surveyor events to the calendar and turn
them into Land Surveyors United Meetups worldwide.

Surveyor Events

Inspire the next generation by contributing
your expertise and experience in Land Surveying
to our 20k+ Surveyor Hive Mind. Mentor the Green!

Mentorship