Hello, I have challenge with my Leica 1200 gps , I bought the radios separate on eBay , but have been having a challenge to programme the pdlgfu 15-2 radios since they different frequencies .how can help with programming them.
You need to be a member of Land Surveyors United - Surveying Education Community to add thoughts!
Add Posts, Surveying Photos, Videos and Articles to the Surveyor Community
Add Stuff to Community
We are committed to allowing freedom of expression for all of our members, and that includes maintaining a safe space for people with opposing views to express themselves. We get posts from all over the country and even the globe, so needless to say, people come with different viewpoints on lad surveying practices and processes. We see this diversity and variety as a real strength-- dialogue and debate are an integral part of the educational process, as well as an important tool in exploring different sides of complex issues.
Replies
http://www.pacificcrest.com/library/User_Guide_PDLGFU15.pdf
You need "pdlconf.exe dealer" or use frequency table, *.upg, to use with pdlconf.exe free.
two are complicated to acquire.I could not get either
this a email copy that send to me:
What you need is a computer with windows 98. This is the only way to program the radio.
We no longer support the RFM radios. Once it dies then you will have to purchase a new radio.
BUT TRY THIS: OPEN PDLCONF.EXE WITH RADIO PACIFIC CREST CONNECT, SAVE TABLE FREQUENY (UPG),
AND, DESCONNECT, CONNECT OTHER RADIO, AND TRY IMPORT THIS UPG
Hi David.
Each radio has a number of channels, each of which cover the same frequency bandwidth. If you set the channel number on each radio to be the same they should work fine.
Be aware, however, that if they are different models, the channel numbers may not start at the same number. Some will start at channel 0 while others may start at channel 1. Since the bandwidths for each frequency range are set the same, just need to set the channel on the radio with the higher number to one lower than on the other radio.
Hope that helps.
Hi David
This link. https://bit.ly/2HwEMoK
Pages 609-611 show how to change the channels / check for available channels, using the GPS1200 controller.