Logged In Members Do Not See Ads

 

Building Surveyors Procedures Detailed

Procedure Details for Building Surveyors

One of the first things building surveyors need to do when inspecting the property is to take notes of the character and description of the property, that is, whether detached, semi-detached, terraced, end of terrace and number of storeys. It is recommended to take note of the overall length of the terrace, if terraced house, and check for any signs of movements or rebuilding to other parts of the terrace.

detached structure and building surveying

Detached structure does not normally require provision for movement unless it is very large. With properties like large block of flats or long terrace, building surveyors need to consider many elements and check if the design of the building has been done correctly to resist the forces that can include ground movements and thermal expansion and contraction.

Many of terraces of old houses were built with no provision for movement. It is always a good idea to look at the flank walls at each end of a terrace for signs of leaning or bulging. Notes of the general lie of the land and the gradient which the property stands on are very important as buildings on the loping sites are more likely to suffer from structural movement compared to buildings that stand on the level ground. Building surveyors will always look for signs of past structural movement.

Building Surveyors Detailed Procedure

Age of the property is one of the most important matters for building surveyor as this information will help to establish what to look for during the detailed inspection. Properties built in different eras will have different defects.

Detailed inspections need to be carry out

Roof Spaces

- depth and type of ceiling insulation should be noted as well as the layout of the roof timber, its size and spacing.  Surveyors also need to take notes of the chimneys area, accessible wiring and plumbing checked.

Room by room inspection

 - building surveyors need to make a sketch and mark type of ceilings, walls, floors, windows and fittings. Lighting points and radiators are also marked. Experienced building surveyor will decide what material is the wall and ceiling made of by just tapping it. If the result of this tapping is inconclusive or he can't confirm type of ceiling, walls or floor, surveyor should mark it in his report and additional advice will be necessary.

Basements, cellars and Sub-Floor Areas

-these places are for surveyors full of information about the house but they need to take some extra care as these places are commonly unsafe (beetle attacks and rot to timbers)

External inspection of roofs

-Chimney flues should be traced to the fireplaces below. All redundant flues (removed fireplace) should be provided with air-vents to ensure a flow of air. Flues that are in use should have flue linings confirmed and a smoke test carried out.

The Elevation

-each elevation should be sketched using simple drawing. Sketch should also show any cracks that are present.

The site and surroundings

Surveyor should make notes of the condition of boundary walls and fences, especially any retaining walls. Driveways and other paved areas should be also checked.

Drains

Soil vent pipes and other drainage must be also inspected by building surveyors as well as drainage system below the ground. However surveyor is not expected to remove manhole covers which are tightly rusted to their frames or to lift heavy duty covers which cannot be conveniently removed by one person.

Votes: 1
E-mail me when people leave their comments –
Land Surveyor

Mark Smith
Columbus Ohio Land Surveying
<a href="https://columbuslandsurveying.com/services/construction-survey/">https://columbuslandsurveying.com/services/construction-survey/</a>
(614) 591-8665

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

Thoughts

  • GeoEducator

    Great article..

This reply was deleted.

You are not logged in

 

Land Survey Guides

Write and Share Your Articles and Presentations

Do you have an article about Land Surveying that you would like to share?

Land Surveying is a timeless art and science and it is therefore, evergreen! You may also know that a lot of older publications have gone away, unfortunately.   If you have written or published land surveying articles in the past, we would be honored for you to share them here with us.  If it is an older article, you can even republish it here with updates and reflections.  

Tip:   If you published an article in the past on one of the older sites which no longer exist, you can use the Wayback Machine to find it.  Then just copy/paste the old article inside a new post here.  Just be sure to tell us where it was previously posted.

Want to embed a PDF Document?

 If you have a PDF document or article related to land surveying that you would like to embed inside an article post, simply copy/paste the following code block into the HTML view of the post editor and replace the BOLD part of the code with the URL of the PDF you'd like to embed.   

Code to use:

<iframe src="https://docs.google.com/viewer?url=https://landsurveyorsunited.github.io/cssfiles/manuals/Surveying-Photos-Submitted-Land-Surveyors-United.pdf&embedded=true" frameborder="0" height="500px" width="100%"></iframe>

TIP:  You can also upload your PDF using the file upload button and then copy/paste the URL of the document you uploaded with the BOLD part of the code above to get a flippable PDF like so:

Uploading PDF land surveying documents to Surveying Articles

Differences between Forums, Blogs and Article posts

Forum Posts are great for asking questions which have a definate answer.  Forum posts are best for a quick exchange of information between Land Surveyors United members.   Please note that All Community Hubs have their own dedicated Forums so if your post is related to a specific hub, it is best to ask your question or share your tip inside the hub in which it belongs for targeted answers.  For example, if your question relates to Leica equipment, ask your question inside the Leica Hub forum for best results as all members inside that hub uses the equipment in question.  Likewise if your question pertains to a Location, you should consider making your post inside the appropriate hub.

Add Discussion

Blog Postsdiffer from Forum posts because you can embed and upload different kinds of information.  Blog posts are best for presenting information and updates for feedback and sharing.  When posting a Blog Post, you can also publish a short excerpt at the bottom which is what most members will see before reading the blog post.  Blog posts are also great for posting new surveying projects and digests of links to multiple surveying topics or your own website.   Things that can be embedded into Blog Posts are videos, images, slideshows, powerpoints, spreadsheets, PDFs, documents and more.

Add Blog Post

 

Articles are similar to Blog Posts in all ways except one.  Articles allow for you to post an Author Block at the bottom with links to your contact info, website information, credentials, etc. Similar to Blog Posts, things that can be embedded into Blog Posts are videos, images, slideshows, powerpoints, spreadsheets, PDFs, documents and more.  Similar to both types above, Hub Owners can add article sections and features to any hub they control on the community.

Add Article

Share your Land Surveying Articles

Surveying Articles is a place for members to Share Land Surveying related articles, presentations and knowledge with the Land Surveyors United Community. Post or embed articles for future generations of land surveyors.