Including Taped distances as observations in Trimble Access to help with Network adjustments for ALTA/NSPS minimum standards reports

Hello everyone,

My name is Chris Siebern and a am a professional land surveyor in Indiana, United states of America.  We have survey procedures in place that keep all of our staked corners within the ALTA/NSPS minimum standards most of the time.  Wher

Read more…

GPS Configurator Trimble 5800 R8

1. Hello

This screen from GPS Configurator Trimble 5800, show neither "Log data" nor " Base", and memory left 0kb,  I don't know why, What have I to do?, Please help 

Read more…

Upgrade Trimble GPS 5800 R8

I am attempting to update an R8 receiver for the upcoming GPS week rollover.  Currently it has v2.31 and according to Trimble v2.32 needs to be installed to handle the rollover.  After downloading the WinFlash utility and while it is configuring the

Read more…

Trimble TSCE Data collector, trouble connecting to a computer to download data.

Tried using a 9 pin serial cable, would a blue-tooth adapter work best.  Has a 26 pin, 9 pin and infrared  outputs, Any ideas?   

Read more…

Trimble Post Processing

Hi! I am using a Trimble SPS852, SPS882 and a TSC2 controller. I would like to know if any one here knows how to get data for post processing in the following format: DAT, Rinex2, Rinex3, T01, T02 and Quark. Or does anyone know any tutorial links for

Read more…

reuse activation disks?

Version 2.0 GPSurvey and related programs no longer are resident on the dongle, is there any way to reuse the activation disks?

Read more…

Trimble 5600 Robotic Radio

I have a Trimble Robotic 5603 (internal 2.4GHz radio) I have tried to connect to TSC2 running Trimble SCS900 software and get incompatible radio error message.

Support says no, the internal radio on the TSC2 is not compatible with the radio in the 560

Read more…

Trimble SX10 any comments on this new tool.

I tried the SX10 this week.   Has anyone else.

Read more…

Custom coordinates system in TSC2

Hello,

Does any one know how to create a custom projection files on TSC2, I'm using the 12.22 version wich do not provide my grid in the Library, So I'm wondering if is it possible to add my grid to avoid typing parameters every time.

Thanks

Read more…

tsc2 controller link to verizon mifi jetpack

We've tried everything we can to link the two with no results. Looking for a few tips to get this thing going. The controller uses Windows Mobile Version 5.0. I believe all my settings are correct but I just can't get it to connect. Any help would be

Read more…

Help with Post correcting GLONAS data from a Geo 6000

I have some data from our new Geo 6000. I can not correct the data properly. I have a GLONAS base station as a refrence but my data dose not look good, and my points are all tossed out. So I am left with features that once held 150 postions now have

Read more…

Trimble HPB450 radio - Unable to connect to base radio

I have a new HPB450 radio but I am unable to get it to connect to my receiver. Here's my setup: RTK Mobile Base Trimble TSCE controller (Survey Controller software) Trimble 5700 receiver Trimble HPB450 radio When I try to connect the 5700 to the radi

Read more…

Calibrating a Trimble S8 total station

I've recently started using a trimble s8 total station and I'm having problems completing calibration steps. I can't understand the instruction in the manual for adjusting the trunnion and I'm not able to calibrate the auto locking because the instru

Read more…

Trimble ProXT Reset to Factory Defaults

to all,

I have a Trimble Pro XT receiver and I cannot communicate to the device using a serial cable. I had the serial communication to the receiver working. I then must of set the nine pin serial port on the receiver to be output only, because now I

Read more…

TSC3 SCS900 Advance measurement module. Closing Traverse Loop

Hi,

I am using SCS900 on a TSC3 with Advance measurement module activated. There was a function in total station setup where I can measure control network. Did anybody know how to define the station when I am closing a traverse loop? Currently I can't

Read more…

Trimble M3 Total Station User Manual

Trimble M3 Total Station User Manual

Read more…

Attribute Display in New Points Spreadsheet TBC ?

Hello Fellow Surveyors,

Can anyone tell me how to set defaults so that Attributes entered in the field with codes are displayed along side Pt numbers in the New Points Spreadsheet in TBC ?

 

New Points Spreadsheet

Point    Northing    Easting    Elevatio

Read more…

TSC2 and R-8 model 3 VRS connection

Never had a problem using my 5800 and tsc2 with survey controller to hook up with my VRS network. Just got my hands on a R-8 model 3 with tsc2 with access and have been having trouble connecting or initilizing with the network.

Green light flashes sho

Read more…

Trimble Business Center Guides and Manuals

If you're looking for training manuals, guides or workflows for Trimble Business Center guides and Manuals, I found a TON of helpful documents on the UNLV website:

 

 

 

 

• Adjusting the Network.pdf
• Importing Digital Level Data.pdf
• Importing GNSS Dat

Read more…

Trimble Business Center.

Hi all.

  I have a question about TBC- Trimble Business Center? Do you have to have the key to use this program? We have the TBC at work but it works if you insert the key. Any comments? Bye.

Maurice

Read more…