Show us why the public should always call a land surveyor

Where are you surveying?

Follow Topcon Surveying Hub

Topcon Positioning Support Hub  is a dedicated place for Land Surveyors United  members who use Topcon Instruments in the field to share experiences and support one another with troubleshooting issues. This group is specifically for discussions and tutorials related to Topcon Land Surveying Equipment.

Please Note: Land Surveyors United Community  is not directly affiliated with Topcon and all logos and imagery are copyright of respective owners.  This group is for educational purposes and social support with Topcon Equipment.

154 Topcon Users
👉️Join this Hub
Land Surveyor

Topcon OS Series 103 Manual

Posted by Mclyn Mas on November 6, 2016 at 10:49pm
Hi All, am new to this topcon os 103 series. Can someone help me with the manual?Also I got a problem with setup coz every time when I try to center the bubble in electric level, the bubble in the circular level is out of range..Am not really sure if that's calibration problem..Thanks

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

★
★
★
★
★
Votes: 0
Email me when people reply –
Follow

Replies

  • Land Surveyor
    Mclyn Mas January 2, 2017 at 7:58am
    Hi Andy..would appreciate your help. Thanks
    • Land Surveyor
      Andy Clarkson > Mclyn Mas February 13, 2017 at 8:42am

      Sorry for the delay. Here is the manual to the original version of MagNet software, there may be a few changes but should be easy to figure out

  • Land Surveyor
    Andy Clarkson December 16, 2016 at 7:49am

    Here is a manual for the basic operations on the OS. I would say that your physical bubble is out of calibration. This manual only explains the basics and does not cover anything to do with the MagNet software on board. I might be able to send you that if I can find it?

This reply was deleted.

Topcon Users

Featured Topcon Posts