Show us why the public should always call a land surveyor

Where are you surveying?

Follow Topcon Surveying Hub

Topcon Positioning Support HubΒ  is a dedicated place for Land Surveyors UnitedΒ  members who use Topcon Instruments in the field to share experiences and support one another with troubleshooting issues. This group is specifically for discussions and tutorials related to Topcon Land Surveying Equipment.

Please Note: Land Surveyors United CommunityΒ  is not directly affiliated with Topcon and all logos and imagery are copyright of respective owners.Β  This group is for educational purposes and social support with Topcon Equipment.

154 Topcon Users
πŸ‘‰οΈJoin this Hub

Topcon Hiper Sr GPS receiver RTK network

Hi Topcon users, I'm looking for a solution for my (Radio Link) problem with the Topcon Hiper SR receiver.

I'm trying to get a fixed solution after connecting the Hiper with bluetooth to the FC-5000 (Magnet Field 5.1)Β  and getting the mouth point and Server connection.

after connecting to the serverΒ  the system don't get a Radio link.

We are using an internet connection (Sim card in the FC-5000) to connect to a reference antenna connected in a RTK network.Β 

We have two old receiver (Topcon Hiper XT) and they are working fine.

who can tell me what the problem is.

Thanks in advance for your attention.

Best regard,

Monty Kock

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

β˜…
β˜…
β˜…
β˜…
β˜…
Votes: 0
Email me when people reply –

Replies

  • Not a Surveyor

    Hello i had simular problem but with hiper v and what i had to after getting the rover connected and field readyΒ  was going to setup then reciver managment then into info then the go to the m in left top courner and click on factory reset it will clear the rovers ram and that worked to get fixed rtk so unless you have all already fixed you might try thisΒ 

    best luckΒ 

This reply was deleted.