Show us why the public should always call a land surveyor

Where are you surveying?

Follow Topcon Surveying Hub

Topcon Positioning Support Hub  is a dedicated place for Land Surveyors United  members who use Topcon Instruments in the field to share experiences and support one another with troubleshooting issues. This group is specifically for discussions and tutorials related to Topcon Land Surveying Equipment.

Please Note: Land Surveyors United Community  is not directly affiliated with Topcon and all logos and imagery are copyright of respective owners.  This group is for educational purposes and social support with Topcon Equipment.

154 Topcon Users
👉️Join this Hub

Topcon GTS-235W to TSC3 Serial Connection

Posted by Dan Dummeyer on October 25, 2018 at 6:21pm

I am having a heck of a time getting this gun to zero from my TSC3.  The gun seems to connect as soon as I run "Station Setup" from the collector, but when I tell it to backsight it beeps but does not zero and the collector says instrument error.

The baud rate is set to 1200, parity is even, stop bits 2.  I tried going up to 4800 on the baud, but I'm really grabbing at straws.  If anyone has any know how it is greatly appreciated.

Thanks,
Dan

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

★
★
★
★
★
Votes: 0
Email me when people reply –
Follow

Replies

  • Kevin D. Allen October 25, 2018 at 9:53pm

    Who's cable are you using?  Some of the old serial cables had a "swapped pair"  Also, Trimbles website has a pretty good knowledge base to drop this question into.

     And, why the cable? or doesn't the GTS-235W have Bluetooth?  

    This might help...

    https://rplstoday.com/community/surveying-geomatics/topcon-gts-235w...

    Community Forums
    Community discussion forums offering surveying support, business topics, job listings, marketplace, and other discussions for Land Surveyors and Geom…
    • Dan Dummeyer > Kevin D. Allen November 1, 2018 at 12:03pm

      Hi Kevin...

      Thanks for replying! I am using the serial cable that does work between our TSC3 and our Topcon GPT-3000.  I tried the bluetooth on the GTS-235W with multiple TSC3's.  I can create a partnership, but I am unable to establish any communication between the equipment. Per Trimbles release notes on Access Version 2015.21 third party bluetooth connections should be supported, and I did confirm that one of our DC's exceeds that version....so I'm lost again.  Again, thank you any and all for help.

      Best,

      Dan

This reply was deleted.

Topcon Users

Featured Topcon Posts