Logged in Land Surveyors Do Not See Ads

Land Surveyor Jobs Available

 

Land Surveyor

staking out point heights

1. Set up the level so that the sighting distances to A and B are about the same. 2. Set up the staff at A and read off the backsight R = 1.305. 3. Set up the staff at B and read off the foresight V = 2.520. The difference h from the required height at B is calculated as: h = V โ€“ R - โˆ†H = 2.520 โ€“ 1.305 โ€“ 1.00 = +0.215m 4. Drive in a post at B and mark the required height (0.215m above ground level). In another frequently-used method, the required staff reading is calculated in advance: V= R - โˆ†H = 1.305 - (-1.000) = 2.305 The levelling staff is then moved upwards or down- wards until the required value can be read off with the level.
Read moreโ€ฆ
E-mail me when people leave their comments –

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

Land Survey Photos By Location

Hey there!
It looks like you are enjoying the community content.

That's nice! Please don't forget to mention us if you use what you just copied on your website. Help strenthen the community by linking back to us!


Thank you very much! Have a nice day! :)

Ok. Don't bother me again, for this session.