(1) Set up the level at a convenient point so that the Bench mark (BM) or point is known(2) Level the instrument with the foot screws.(3) Send the staff to the reference point where the staff is to be held upright.(4) Direct the eye piece of the instrument onto the staff, focus and read the staff and book your reading.(When the level instrument is correctly levelled the line of collimation coincides with the horizontal line. A horizontal plane is then established. If the height of this plane is known, the heights of ground points can be found)Campus is free from animal attacks but not from the scotching sun.
Read more…
Survey Photos by Tag or CategoryEarth's Largest Survey Photos Collection
Since 2007, Land Surveyors around the world have shared their best Surveying Photos from the field. Inside this collection you can transport yourself to virtually any location on Earth and see how Land Surveyors work, types of equipment being used and environmental challenges associates with being a land surveyor in that location.
Location Based Chapter Hubs also have photos specific to the locations they represent. You can use our Surveyor Apps for quick sharing of your photos from the field.
Note: Members who have uploaded their photos of surveying to this collection can also move their photos to location based hubs. To see how, follow this tutorial.
Survey Photos by Tag or CategoryEarth's Largest Survey Photos Collection
Since 2007, Land Surveyors around the world have shared their best Surveying Photos from the field. Inside this collection you can transport yourself to virtually any location on Earth and see how Land Surveyors work, types of equipment being used and environmental challenges associates with being a land surveyor in that location.
Location Based Chapter Hubs also have photos specific to the locations they represent. You can use our Surveyor Apps for quick sharing of your photos from the field.
Note: Members who have uploaded their photos of surveying to this collection can also move their photos to location based hubs. To see how, follow this tutorial.
Thoughts