FEMA for Land Surveyors is a support group for land surveyors regarding the common services directly involving FEMA that land surveyors provide for clients. These include LOMA, CLOMA, LOMR-F, CLOMR-F, etc
An eLOMA, processed through FEMA can be a streamlined approach, especially considering that it may take only minutes, rather than months, for FEMA to approve a Letter Of Map Amendment (LOMA) using the eLOMA method.
This method of submitting data to FEMA for the consideration of removal from the Special Flood Hazard Area (SFHA), although expedient, must meet certain criteria. For one, the subject structure (building) or parcel of land must not be in Zone A. Then, if not in Zone A, only one structure or parcel may be the subject of the eLOMA.
How many of you frequently use the eLOMA? If so, what is your professional opinion of the process and the limitations in application of the eLOMA?
Your comments will be greatly appreciated.
Scott D. Warner, R.L.S.
Senior Director / Editor
Land Surveyors United
You need to be a member of Land Surveyors United - Surveying Education Community to add thoughts!
Replies
The problem here is that the clients wanting the LOMA are usually in Zone A. The chances of getting the hazard zone lines moved are slim. Sometimes it's a no-brainer, but usually you think to yourself, "That's not gonna happen."
This is a good link to get started, but you must be approved by FEMA as a Land Surveyor or Professional Engineer to be able to access the eLOMA functionality: eLOMA
How to Apply For a Letter of Map Amendment (LOMA) or Letter of Map Amendment – Out as Shown (LOMA-OAS) Using Form MT-EZ
Found Here
The FEMA Letter of Map Amendment (LOMA) or Letter of Map Amendment - Out as Shown (LOMA-OAS) determination is a no cost-application and will state the property or building is correctly shown outside the Special Flood Hazard Area (SFHA) and, therefore, the mandatory flood insurance requirement does not apply. There is no review fee for FEMA to process LOMAs or LOMAs-OAS, but there may be costs for surveying, etc., related to preparing the application for the LOMA.
When Can I Submit the LOMA or LOMA-OAS Request?
1. For current effective maps – You can submit at any time. 2. For a preliminary map that is going through the review and adoption process – You will need to wait until that map is less than 60 days from becoming effective. FEMA cannot issue a LOMA or LOMA-OAS for a map that is not effective yet. Since FEMA reviewers are required to make a determination within 60 days of receiving a request, requests that are received more than 60 days in advance cannot be issued for a map that is not yet effective.
Documents Needed to Submit a LOMA or LOMA-OAS
1. Obtain the FEMA MT-EZ form. Go to FEMA web site (www.fema.gov) and search for MT-EZ, or
directly to www.fema.gov/plan/prevent/fhm/dl_mt-ez.shtm
2. Recorded Deed. Copy of your property Deed. If you do not have a personal copy, contact your county (usually the office of taxation & records, registrar or recorder of titles, etc.). A recorded plat can also be submitted if a recorded deed is not available.
3. Computer Mapping (aka GIS) Based Flood Map. A map obtained from your city or county with your property highlighted. Include the best available recent aerial photo that shows your structure, the parcel layer (boundary lines), a scale and north arrow, and a logo or some other proof that a governmental unit prepared the map. If topographic contours are available, include that layer (especially if they are more recent 1 or 2 foot contours). If possible, have the GIS map at a big enough scale so the reviewer can see a near-by street intersection. Some cities and counties have interactive maps on their web sites that allow you to print a map like this on your own. In some communities you will need to contact your city or county and request a map like this be prepared, and there may be a charge. If your county does not have GIS maps available, a tax map can also help the reviewers with your application.
4. Elevation Data. IF the STRUCTURE is not in the mapped 1% annual chance floodplain (the SFHA or high flood risk area), a survey is not required. If the structure is in, touches, or is very close to the SFHA, a survey or other official topographic data must be included.
5. A FEMA FIRMette Map. A FIRMette is a full-scale section of a FEMA Flood Insurance Rate Map
(FIRM). The FIRMette also includes the map title block, north arrow, and scale bar. Your community may be able to help prepare a FIRMette for you. Otherwise, you can make your own FIRMette by going to FEMA’s Map Service Center at www.msc.fema.gov (there is a tutorial on how to make a FIRMette on the bottom right corner of the home page).
Instructions for Completing Form MT-EZ Page 1 of 3 – Section A:
Question 1 – Since the area was first mapped as a 1% annual chance floodplain, has fill been placed on the property to raise ground that was previously below the Base Flood Elevation (BFE), or the 1% annual chance flood elevation? Check “No” if: NO FILL has been placed below the BFE since the date of the first FEMA map that showed the area was a high flood risk area (see map dates in the FEMA Community Status Book). If fill HAS been placed below the BFE sometime after the date of the first FEMA map that showed that area as a Special Flood Risk Area (SFHA) or a high flood risk area, you are not eligible to apply for a LOMA or LOMA-OAS. Go to the bottom of these instructions for information about Letters of Map Revision based on Fill (LOMR-F). Question 2 – Fill in address (if one is available) and legal description. Question 3 – Check the applicable box. Note that flood insurance is only mandatory if the structure is in the high flood risk area. If a portion of your property is in the high flood risk area, but the structure is not, check the “A structure on your property” box and note the date of construction.
Example of FIRMette
Applicant Information - Fill in your contact information. A surveyor or other designated agent may also sign on the landowner’s behalf.
Page 2 of 3 – Section B:
Question 1 - Check whether it is the structure being removed, or the whole lot (or a portion of the land), and fill in the property description. Question 2 - Fill in the building address and type of construction.
Question 3 – Must provide the latitude and longitude information. Be sure to check the applicable horizontal datum (NAD83 or NAD27). A hand-held GPS unit, survey, etc. can be used to establish the latitude and longitude, or you can contact your city or county for assistance.
Question 4 – Must be completed.
- NFIP Community Number: Look at the FIRMette for the NFIP Community Number (will be a six digit number starting with 27 in Minnesota – 27XXXX). Note the community where the parcel is actually located – if within the city boundary, note that city’s number. If outside the city’s boundary, note the county’s community number. - Map & Panel Number: Indicate the panel number of the FIRM map containing your property. You can
obtain the map & panel number from the FIRMette (in the sample FIRMette above, the map and panel number are “27163C0345E” below Map Number). - Base Flood Elevation and Source of BFE:
o If this is a LOMA-OAS request (the structure is not in the mapped SFHA), the BFE and its source are
not required. o If this is a LOMA for a structure shown in, touching or near the high flood risk area, obtain the BFE
from your community’s Flood Insurance Study (FIS) or from your community. If this is a detailed study area, the BFE will be listed to the nearest tenth of a foot in the community’s FIS. If this is an approximate study area and is labeled as Zone A with no elevation, see if your community has a BFE estimate established at your location. If they do not, you (yourself or with your community’s assistance) will need to check with other potential sources for estimates of the BFE at your site. Typical places to check with include: the county engineering department, the watershed district (if one exists at your location), the U.S. Army Corps of Engineers and your local DNR Waters area office (see link at http://files.dnr.state.mn.us/waters/area_hydros.pdf ) If you cannot find a BFE estimate, you can attach a cover note with the application and request that FEMA determine a BFE estimate for your site. (Note: FEMA will only estimate the BFE for a single lot request, and it will be a conservative estimate.)
Question 5 – What elevation data are required?
- If this is a LOMA-OAS request (the structure is not in the mapped SFHA), an elevation survey is not
required. - If this is a LOMA, a survey by a licensed surveyor or professional engineer will be required in most cases
to show the lowest adjacent grade (LAG – the lowest point where the ground touches the foundation of the building, including an attached garage or deck) is higher than the BFE. One other situation where other data may be accepted is if the current effective map is a Zone A (approximate study area), and there is a preliminary new FEMA map going through the review process that shows mapping based on better data. The information in that preliminary map may be accepted as “best available data” if the review process is far enough along that the new data have been accepted.
Page 3 of 3 – Mailing Instructions: Mail the MT-EZ form, and the attachments noted above, to the address on the third page of the MT-EZ form:
LOMC CLEARINGHOUSE 6730 Santa Barbara Court Elkridge, MD 21075
What if Filling Occurred Below the BFE After the Date of the First FEMA Map That Showed High Flood Risk in That Area? How do I get a Letter of Map Revision based on Fill (LOMR-F)? Go to www.FEMA.gov and search for MT-1 (the form for multiple lot LOMAs or LOMR-Fs) or go directly to www.fema.gov/plan/prevent/fhm/dl_mt-1.shtm The application process is similar to that for a LOMA, with the following key differences:
1. Fee charged – a FEMA review fee is charged for LOMR-Fs ($425 as of 10/2009), 2. The lowest adjacent grade (LAG) AND the lowest floor (including basement or crawl space) must be
above the BFE & 3. Elevation survey is required.
What if I Obtain a LOMA, LOMA-OAS or LOMR-F? Does That Mean I’m Safe From Flooding? Being outside of the mapped high flood risk areas is no guarantee of staying dry! There have been many examples in Minnesota of higher floods than the 1 % annual chance (or “100-year”) flood, including intense rains exceeding 10 inches in localized areas all around the state. There can also be seepage into basements and lower floors, especially if they are lower than the flood levels.
Landowners are encouraged to buy the cheaper flood insurance available when the structure is not in a high flood risk zone. Note that more than 1 in 4 flood insurance claims are for structures located outside of the mapped high flood risk areas. If there is not a history of flooding claims, they may be eligible for the significantly discounted premiums of a preferred risk policy (PRP).