I have very limited knowledge with using excel and vba. i need to select all rows with "xx" number in it and copy it to a blank page.
i have a data set with over 32k rows of data. i was able to highlight the "xx" and make them red but that is not go
Instructions for installing Trimble Geomatics Office in a Windows 7 computer (tested with TGO v1.63 on a Windows 7 Professional 64 bit system with 8 Gb RAM)
If your job has your plotting a lot of deeds on a daily basis, i found this to be useful
Ā
http://www.typeonline.co.uk/number_pad_lesson1.html
Ā
after a few hours on this website i am up to almost 40 words per minute, and i have a missing middle finger,
Read moreā¦type in the command line LAYISO to isolate a clicked layer, when you want to turn them back on type LAYUNISO
Ā
type in the command line LAYFRZ to freeze a clicked layer and LAYTHW to that
Ā
you can also try these useful commands
Ā
laylck, layoff, layulk
Read moreā¦Need to rotate your drawing in paper space but dont want to disturb your model space?
Ā
type dview into the command line choose twist and give it a rotation angle
Ā
VIOLA!
Read moreā¦need to convert text to mtext?
Ā
type in the command line TXT2MTXT
Ā
and BEHOLD! you have Mtext
Read moreā¦type flatten in the command line
Ā
select your schizofrenic polylines and hit enter, when it asks "remove hidden lines" say no (u can delete later if you find some)
Ā
still giving you problems?
Ā
type pe then enter, then m for multiple (if this is the case
Read moreā¦type align in the command linepick object you would like to align, pick first base point, then target point, then second base point, then target point hit enter if finished or pick another pointbe sure to watch the command prompts for the scale optio
Read moreā¦draw a 4 sided closed figure using the line command
Ā
type bpoly in the command line
Ā
click in the center of the figure you just created
Ā
VIOLA! if it was closed it is now a polyline
Ā
Ā
i use this alot when plotting deeds to check closure, if it isnt close
Read moreā¦ive posted this on the Carlson support forum and havent gotten much information, can anyone help me with the steps to exporting a file out of tgo and importing into carlson and having my point attributes show up
Ty Olinghouse
The underutilized AutoCAD MULTIPLE command
When you need to repeat a command several times, consider the MULTIPLE command. At the command prompt type MULTIPLE followed by the command. Take the POINT command for example. Without the multiple prefix you
Read moreā¦OPUS question... Ā several pairs of points were run a few months ago, then i ran several more recently, when i check between them, my elevation is consistently off a foot, any ideas?
Ā
pts 1-10 Ā were run 4 months ago
Ā
pts 10-20 were run the other day
Ā
the
Read moreā¦ACSM on WEB RADIO Weekly show by surveyors, for surveyors and those they serve.
Gaithersburg, February 7rd, 2011?
The American Congress on Surveying and Mapping (ACSM) announced in late January a new program for surveyors and mappers across the U.S. Th
Read moreā¦ODOT printed maps Section, Township and Range, I have printed these out on 11" x 17" and had them binded they work great for navigation! Download by County!
Ā
http://www.okladot.state.ok.us/hqdiv/p-r-div/maps/2003county/index.htm
Ā
2003 NAIP Air Photo Im
Read moreā¦Try IP Webcam Compatible if the camera shows green screen or you have android version below 2.2.
Turns your phone into a network camera with multiple viewing options. View your camera on any platform with VLC player or web browser.
Works with third-par
I know a lot of Surveyors world wide, some personally and some via email and phone, I have found out over the years a lot of my colleagues are or were married to someone in the medical field.
Ā
I personally was for 18 yrs....
Ā
what does your significant
Read moreā¦I have played with computers self teaching myself how to build, upgrade and troubleshoot myself for many years now, it has also helped when times were tough because i was always able to bring home a few "strays" as my ex called them to repair or upgr
Read moreā¦Ā
Im not a member of OSLS but i still recieved this email, Just passing along if anyone wants to go
Ā
Registration for the 2011 Annual Convention is now open at www.osls.org. Here are a few things that you need to know that will make the process go more
Read moreā¦