Location
Adelaide, South Australia
Location
Adelaide, South Australia
Please tell other members why you are here:
Daniel Palmer
I have experience with the following
Engineering, Cadastral
Enjoy, explore and contribute to our community....a living library of land surveying which is not controlled by 3rd party interests- it is controlled by you, the surveyor. No one else in the world aside from our community members catalogs changes in the surveying industry. No one else collects, curates and showcases the importance of land surveyors to society for future generations to learn from and to promote public awareness of this importance. It takes just a few moments per week to curate a rock solid legacy in surveying but every minute you spend sharing your experience will breathe ten years of life into the profession.
You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!
Comments are closed.
Thoughts
determining the center of large pipes as follows: Pipes are a even circle, so have the rodman hold a chain tape at one point and strike an arch across the opposite side slowly. the largest amount measured will be the diameter. repeat the process if needed. After determining the diameter just divide by 2 to find the center. after that, there are many ways to locate that position, either by math or field..... I am just not sure what you are trying to do. Note: there are temp conversions for a chain tape if needed for accuracy. I hope this helps.