Land Surveyor Forum

Replies

• Government Professional

  Francisco P. Alconera October 12, 2015 at 6:13pm

  Dear Roy,

  I did download your rinex data and convert it to version 2.11, and try to send it to Auspos attached is the result.

  I do agree with John, to convert the rinex to a lower version of 2.11

  Hope this help. . 

  Francisco
  • Seeking Employment

    John Garrison > Francisco P. Alconera October 12, 2015 at 7:10pm

    Note: the antenna is a TRM22020.00-GP (no ground plane).  The AUSPOS GPS Processing Report indicates it as being a TRM22020.00+GP. 
• Seeking Employment

  John Garrison October 12, 2015 at 12:58am

  Here you go... just converted the RINEX 3 file to a RINEX v2.11 file.
• 

  Michael Alan Sanchez October 11, 2015 at 9:08pm

  When I had problems using Ashtech, I would compare the file to one which did go thru using notepad and try to make mine look similar except for the reads themselves, it was time consuming but it worked everytime.
• Seeking Employment

  John Garrison October 11, 2015 at 6:19pm

  You can use TEQC to strip out all observations except L1, L2 and P1 and it will work. You can send me the file if you wish and I'll fix it for you if you'd like. I wrote a paper on this once so I'll see if I can did it up.
  
  John
• 

  Luis A. López Rijos October 11, 2015 at 6:09pm

  I had a lot of error message and the memory appears to be with space but was full. I copy the file of config and erase and format the memory. That fixed my problem.
• 

  Mark Sidler July 13, 2015 at 6:44pm

  Greetings Roy,

  I would check, (maybe you have already) the Survey Styles.  You probably are using the RTK Infill so check there for the rover settings.  Make sure you are using L1 and L2.  This will give you both frequencies and allow your Rinex conversion to work.

  It has been a long time since I used the 4700 but these settings are the same for the R8's.

  Hope this helps.

  Marcus

  www.dc-survey-software.com