TSC2 Draw lines

Hello people, I'm a happy user of a Trimble TSC2 controller but a friend of mine that uses the SurveCE software when he's doing the land surveying, he can auto join points automatic using commands like start and stop and they appear as a polyline 2D/3D, export as dxf and this is hours of work in the office, can I do this with my TSC2 software?Thanks! ;)

You need to be a member of Land Surveyors United - Surveying Education Community to add thoughts!

Join Land Surveyors United - Surveying Education Community

Email me when people reply –

Replies

  • Hello Justin,

    How are you? Hope things are well with you and I hope you and yours have a great Holiday Season. Thanks again for everything you do. I got your message about Linked in but I don't find that site user freindly but Thanks anyways. I recently replied to Francisco Gomes post concerning automatic linework generation and would like to send him a Feature Codes Library but could not find the means to do that? Am I missing something?

    In any event Thanks Again and its great to be a part of Land Surveyors United!

    Paul

  • Hola Francisco,

    el TSC2 es capaz de introducir un código de biblioteca, que es la opción de elegir cuando iniciar un trabajo. La biblioteca contiene todos los códigos de campo; trabajo en línea códigos códigos y símbolos. Cuando usted toma una foto, decir Borde de camino de tierra, muestra code,EDR... se puede empezar una línea mediante un código de línea comando como... EDR_B. A continuación, tomando los sucesivos disparos en el borde de la carretera de tierra inclusive curvas hasta llegar a la final donde tiene que escribir... EDR_E. En un símbolo, por ejemplo, un monumento, debe introducir el código de un monumento... código de ejemplo, BM. ..BENCHMARK... y el símbolo se dibujarán automáticamente cuando se descargan en el TBC, Civil 3D, Cad o siempre que haya configurado el entorno Cad. Su llamado "Field-To -Finish"... mire... usted puede encontrar las instrucciones sobre cómo configurar el sistema. He adjuntado un Código de función Biblioteca.... Espero que esto ayude a Pablo...

  • Hello Francisco,

    Your TSC2 is capable of inputting a Feature Codes Library which is an option to elect when starting a job. The library contains all of your field codes; line work codes and symbol codes. When you take a shot, say Edge of Dirt Road, sample code,EDR...you can start a line by using a line code command such as...EDR_B. Then taking successive shots on the edge of the dirt road including curves until you reach the end where you would enter...EDR_E. For a symbol, say a monument, you just enter the code for a monument...sample code, BM...benchmark....and the symbol will be automatically drawn when downloaded to your TBC, Civil 3D, or Cad provided you have set up your Cad environment. Its called "Field-To-Finish"....look it up...you can find directions on how to set your sysytem up. I've attached a Feature Code Library....Hope this helps...Paul

    • I already tried this once, but in the end I cannot export to dxf to import in civil 3d.

      Thanks.
  • si estas usando trimble access con tu TSC2 no puedes hacerlo, unicamente puedes crear lineas entre los puntos que deseas y ya, puedes exportar esa linea como un dxf o similar, prueba por favor con la ultima version de trimble acces y el paquete roads, alli puedes hacer algo como lo que buscas, sin embargo puedes tambien crear tus propios dtm en campo.

    Saludos,

    puedes escribirme a [email protected] si deseas ayuda con tu trimble access ya sea para Estacion total o GNSS,

This reply was deleted.

Answer As your Facebook Page

Global Surveyor Forum

Latest Discussions by Category

Add Your Expertise

How to Utilize Surveyor Forums

How to use Forums
Our forums on Land Surveyors United are here to be used as much for finding help with problems in the field as the are for you to express your opinions on anything that has to do with land surveying in general. Feel free to share anything that is on your mind, as long as it isn't meant to damage another member's reputation. Please keep it clean and help insure that everyone has the opportunity to enjoy the benefits of being part of a community that grows together.

We are committed to allowing freedom of expression for all of our members, and that includes maintaining a safe space for people with opposing views to express themselves. We get posts from all over the country and even the globe, so needless to say, people come with different viewpoints on lad surveying practices and processes. We see this diversity and variety as a real strength-- dialogue and debate are an integral part of the educational process, as well as an important tool in exploring different sides of complex issues.

All Community Hubs inside the community have their own forum for asking specific questions to other surveyors, by location, equipment type, etc.

Global Forums

Blog Topics by Tags

Monthly Archives