Show us why the public should always call a land surveyor

Where are you surveying?


🌐 Show Forums for All Locations
Land Surveyor Community

dear all good morning,

i would like to know how can i measure correct instrument height for the traversing at a new site,because when i am measuring the measuring tape is not in vertical to reference station to instrument height mark.

that is why there is showing error in all elevation measurements. 

please explain me good suggestions for proceed my work.

thanks

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

Votes: 0
Email me when people reply –

Replies

  • If your measured heights with tape are 4.5' to 5.5' then simply subtract 0.015 and this should get you very very close to true height.  Sounds to me you might have some other error going on because typically the survey total stations will not measure vertical that accurate consistently to come to the conclusion that the height of instrument is the problem.  How long are the shots being taken.  That makes a big difference as well.

  • If you're using Leica, then you have ways to do that. Using a height meter is for one. Another is to employ the "Transfer Height" application if you're using the SmartWorx data collection system.

    Horizon announced last year I gues that it had developed a new way to measure HI. I did not see it how it works.

  • In extreme cases, level to a stud adjacent to the traverse station.  Set the instrument VA to 90 and read the "instrument height" to a staff above the TBM.  I have used this method when intersecting from 2 instruments when collimation heights were critcal.

  • If you are getting an error in just V. I would also suggest doing a 2 peg test as equipment such as Trimble corrects for this height measurement error in the software and the Total Station may need adjusting.

  • Land Surveyor

    It is not necessary typically to consider such an "error" since it is compensating. In other words all the instrument heights, if measured the same way, will contain the same error therefore it has no effect on the result. However you can compute the difference between the true height (TH) of the instrument and the measured height  (MH) of the instrument by considering the width of the instrument divided by 2 (WI/2). MH squared minus the WI/2 squared equals TH squared.

    Or C2 - A2 = B2

This reply was deleted.

Answer As your Facebook Page

Global Surveyor Forum

Latest Discussions by Category

How to Utilize Surveyor Forums

How to use Forums
Our forums on Land Surveyors United are here to be used as much for finding help with problems in the field as the are for you to express your opinions on anything that has to do with land surveying in general. Feel free to share anything that is on your mind, as long as it isn't meant to damage another member's reputation. Please keep it clean and help insure that everyone has the opportunity to enjoy the benefits of being part of a community that grows together.

We are committed to allowing freedom of expression for all of our members, and that includes maintaining a safe space for people with opposing views to express themselves. We get posts from all over the country and even the globe, so needless to say, people come with different viewpoints on lad surveying practices and processes. We see this diversity and variety as a real strength-- dialogue and debate are an integral part of the educational process, as well as an important tool in exploring different sides of complex issues.

All Community Hubs inside the community have their own forum for asking specific questions to other surveyors, by location, equipment type, etc.

Topics by Tags

Monthly Archives

Global Forums

Add Your Expertise

🌐 Explore Forums Based on Location

Blog Topics by Tags

Monthly Archives