software - Land Surveying Video Guides - Land Surveyors United - Global Surveying Community2024-03-29T11:55:54Zhttps://landsurveyorsunited.com/video/feed/tag/softwareRotate Points in Trimble Accesshttps://landsurveyorsunited.com/video/rotate-points-in-trimble-access2022-11-23T21:15:03.000Z2022-11-23T21:15:03.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/10890440666?profile=RESIZE_400x&width=400"></div><div><p>In this video I show you how to rotate points in Trimble Access using the COGO feature.</p>
<p> </p>
<p>TRANSCRIPT:</p>
<p>I guess we'll come back to serve angled Robert so had some guys on Facebook keep me up about cocoa routines about rotating points in a file using trouble access so I know that cocoa routines internal access can be a little kind of different especially if you're used to serving a pro but I'll tell you what I'm going to show you how to do that today we're gonna load up some points and I'm gonna put this to give it for you I'm Gonna show you how to rotate through really a lot easier than you think so I'll tell you what hmm let's do this let me get this set up you guys watch this [Music] you down okay I'll get everything set up you ready to go so you guys check this out so what we're going to do is I've already created a job I've just called it red tape so we're gonna go into jobs we're going to import/export I'm going To import fixed format I'm going to go find rotate accept okay so I should have these points in here now if we go back to jobs we'll go back to properties job and look feature library I don't have anything let me show you the old trick or clayton's so if I go into map you can see you can see my points of map so there's all my points but watch what happens if you use a feature library so if I go to properties a job feature library I'll say training which is one I'm using and we'll say accept now look now we've got lines in here so to me this is huge because especially when I'm rotating points and stuff like that I like to see what's going on I don't like to just rotate a big group of points and not know that everything really rotated so this probably be my first suggestion to you because I'm not big on rotating points out in the field I'd rather do it in a office but I realized sometimes you just don't have a choice here's what We're gonna do and this is actually rotating points is a whole lot easier than you think so if I go into menu COGO I go to transformations now I'm all set rotate points so you have different options here rotate scale and translate rotates obviously what we're going to do scale would be like I want to adjust the scale I'm not exactly sure why you'd ever want to do that and translate is really handy like if you're sticking some grade and the contractor comes up Say hey I want to do base course you can actually translate all the points up like six inches per base course if you need to so let's stick with rotate so here we go so when you see the screen gets a little terminating because chances are what you guys typically are seeing is this you're seeing an origin point and a reputation and you're like I don't know what I've got to get out and calculate the angle and all this other stuff this is just Crazy this is hard this is difficult it's an easier way do it now I'm gonna tell you this older versions of access this is pretty much all you have the newer versions and I don't remember which version it was all I can tell you is a newer version they changed this they realize that this was an issue so check this out if you go out here to reputation there's these three little dots with this arrow on the side if I click on that and I say to Asmus now Look what happens I have azmuth one and asthma two so we know our origin point is point number one that's the point that in our little scenario we're going to say that's the point that we found what were what we're saying is let me go back to the map real quick what we're saying is is here at point number one we found that iron pin so then if you keyed in all the other corners and you put that in so now you're looking for them so typically we might go in put in point Number one we'll put the bearing on the plaque we'll go up here and see if we can find number two so based on that bearing and distance so let's say that we found pointing to but we shot it stored in this number five now what I want to do is I want to rotate this whole thing to match up to point number five over here so what I'm going to do is I'm gonna go back to my transformations back here and I'm gonna go in I'm gonna say to Asmus but I'm Gonna use the calculator this is the part that I think people miss so I'm go to calculator what I'm gonna do is I'm gonna say asmath so now look what happens between two points you have some other options in here what we're going to use today is between two points so if I say from point number one to point number two I want to know what that azmuth is I say except there it is I say accept so now it's populated in here so now asthma's number two that's what I Want this is where I'm rotating from this is where I'm rotating to so number two same thing two as months I'm gonna come down here to calculator I'm just gonna clear out what I had I'm gonna say azimuth again and this time I'm going over number one and I'm gonna go to point number five and I say enter and accept so it gives me that I say except there's that bearing so now then I've got buffering Zener I've got the frame from 1 to 2 and then from 1 to 5 and That second one is 1 I'm rotating - okay so let's hit next right here it says this is basically what it's asking you is what points do I want to rotate so I'm gonna say add and I'm gonna say selection from a job because I know that I just want to go from 1 to 4 or the points I want to rotate so 1 2 3 & 4 I want to rotate those to where it matches up with line 1 to 5 so now we're going to say enter and there's the four points that I just chose you'll note my command Codes on here for drawing that line work I say except applied to define transformation yes for points were transformed there you go it's rotated all of them to fit that and we can we can easily see that everything is rotated by the way so I hope this helps get you pointed in the right direction the cuddler routines and access really aren't that difficult they're just different than what you used to pretty much everything's in there I've got a Few other things that I'm looking at that some guys have asked me for then I'm gonna try to put together so it's kind of a slow process this is Monday morning and I should be getting them truckin any Mississippi right now and I'm building you this video so just kind of give you an idea how my life works so anyways guys be safe like and subscribe if you subscribe you get notified every time that I post a new video and if you like that tells me What you guys enjoy if you like it then I'm I'm headed down the right path so help me out with that would you so anyways if you guys have got any questions just give me a give me yell give me a shout and as always be safe and I'll see you guys on the next video thanks a lot</p></div>Convert Survey Pro files to Access or Origin files - Surveying with Roberthttps://landsurveyorsunited.com/video/convert-survey-pro-files-to-access-or-origin-files-surveying-with2022-11-23T21:12:43.000Z2022-11-23T21:12:43.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/10890439093?profile=RESIZE_400x&width=400"></div><div><p>Upgrading from Survey Pro to Access or Origin? What are you going to do with all those old Survey Pro Jobs? Can I convert those and use them in my new collector? In this video I show you how to convert those files and use them in Access or Origin data collectors.</p>
<p> </p>
<p>TRANSCRIPT:</p>
<p>Ah hey guys welcome back to surveying with Robert's Tuesday tip so when I was out in Vegas I talked to the Trimble guys about making some kind of uh converter inside of access that we could take a survey Pro job and convert it to an access job well maybe someday but it sounds like they are pretty hooked up and that's not going to happen so I thought what I Would do is I would show you guys how to convert these files using terminal Business Center I don't get excited you don't have to go out and spend four thousand dollars for a copy of software just to convert the uh the files for your your survey Pro job files over to access job files you can download the free version of Trimble Business Center and you can go in there and drop the files in and Export the files out and I'll show you How to do it so what we're going to do right quick is I want to um I just want to get some shots and um I just want to get some shots so we can bring them in so what I've got is survey Pro like 5.8 or something like that on the status collector so what I did is I went out and grabbed the survey Pro data collector and I grabbed A uh r8s's so I thought this would be a little bit more real world and I used 5.8 because that is pretty close to the version where they added the R8 S's so I thought this would be a good you've got old survey profiles and you want to convert those to access or to origin so I thought this would be good and I didn't have any job files on my computer so I'm out here In The Wind in the cold just for you guys doing this for you guys freezing to death runny nose wind blowing so uh I just want to show you guys how to convert these files because I know I've got a few people that have switched over to access and they're having that issue right now themselves so I just uh thought I'd jump out here Get a few shots and today is Tuesday should have done this yesterday I got tied up with a bunch of stuff wasn't able to do it honestly I don't have time to do it right now I should be on the computer helping some people with some stuff but if I don't uh get it done it's going to be dark on us and then that ain't gonna work out so well so enough to mention the fact it'll be Colder right so um I was going to do this yesterday afternoon and it started raining on me so I wasn't able to get it done so just a few more shots just so we got something to look at and we'll take it in there and we'll convert it in business center and we'll see what it looks like and yes I'm currently using the insta 360 camera that some of you saw me carrying around at uh at Dimensions that you guys were asking about um it's actually a pretty cool camera it uh would be cool to use it you know if I was wanting to post some Social Media stuff some videos on Instagram or something like that you can actually process everything In your phone if you wanted to but I use the desktop software okay last one I'm about to turn into a popsicle so let's go in here and see if if we can convert these files from survey Pro over to access or over to origin and we'll see how that works I've got both so we can try and see what happens okay So we just shot all that stuff out there in the driveway now I'm going to show you how to take it from a survey Pro survey file to a um or actually I think this this is an old enough version it may be a survey Pro dot job file I'm going to show you how to bring it in to access or not intact yes I'm going to show you how to bring it into access but first thing I'm going to show you how to bring it into Business center okay so the thing about business center is I do not have my license plugged in so I actually have the old school dongle Hardware lock right here once the big one because I've had mine forever I don't I didn't get one of those cute little plastic things so cool Pelican cases for mine because I've had mine way Before those came out okay so let's go in here and load up terminal Business Center so um I've got an older version of survey Pro on this data collector but the reason for that is because I figure you you're going to have older survey Pro job files that you're going to want to convert over to an access file right so you've you know decided to go ahead and bite The bullet and get origin or get um you know access or whatever and you've got all these old job files and you're like how in the world am I going to convert them well be nice if jumbled been counting on their toes and um would have um you know built some kind of converter in Access or something so you could bring a job file in and convert it but they Didn't so we got to do it the hard way so you're going to download you're going to go to if excellent let's just look at this real quick let me do this if I just Google Trimble Business Center download terminal Business Center so here's what you're going to do you're going to go in you're going to say download the latest Version when you do it is going to pull my internet to slow tonight it is going to ask you your name blah blah blah if you do not want to be bothered with a sales guy calling you down here at the bottom if it says do you have a current software license say yes or it's going to ping me or ping somebody in your territory and you're going to be getting a phone call because trimble's gonna send out a lead on Business Center so just just say yes you got it unless you and if you want to find out more about business center ask me how's that so anyways you're going to do that when you do that they're going to send you an email so you're going to be looking in your email watch your junk box sometimes my land's there but watch your email you'll get an email and it'll say um that you know you can download it gives you a link to download terminal Business Center so to do this you don't need a license in order to do what I'm fixing to show you so you can download this for free installed on your computer at the office convert the files that you want to convert unfortunately we have to do them one at a time I don't know a better way to do it but just do them as needed I guess so let me get out of here you know how to do that now it's okay Now then I am going to go to Us survey foot scale only and I hit the default button so it defaults to that template and I think I got a I started the TBC 101 um I've kind of pulled back on that a little bit I'll explain that in a later video but um I do I think I did put some on there About template for uh TBC but you guys may want to look at some will say okay so it's going to create project now then it creates this grid now you probably heard me complain about this before it was a little bitty icon down the bottom maybe there's a way to make these icons bigger but I'm not exactly sure so I just go down here click lower right hand corner down here at the bottom little B icon shows grid I just get rid of it okay so the way I've got mine set Up from years past is when I plug in a tsc3 or a ranger 3 or anything else I get this paint on the right hand side that um it's the device manager pane yes device devices direct connection but it's I get connects me straight up with with the mobile device center to the data collector anyways so if I go to survey Pro and I open it I'm going to find a um survey Pro to Access now then if you bring this over with your um like jump drive or something like that right you you bring it over any way you want to just drop it straight into access when you do it's going to read why do I keep saying access you're dropping into business center I got too many programs going on in my head okay we're going to drop it into business center here it is Boom you're going to see all the vector lines and Everything attached okay so you're not worried about this because you're just wanting to get this to another data collector so I am going to window everything I'm going to go up here to export not to pull down below it up here at the top there's like two buttons right there okay that one's export formatted or you don't want that you just want the export up here at the top you're going to come over to survey And you're going to scroll down until you find Trimble access job file exporter that's the one you're looking for so what I'm going to do to make this a little bit easier on us is I'm going to say file save as and I'm going to call this um let's just call it s p Q axis SP to access Save okay so now let me back up I'm going to close that I'm gonna go to export again keep losing my mouse okay so now you're gonna see it says SP to access.job okay it's populated it's going to put it in the directory and I'll show you where that's at so we've selected all those shots And I'm going to export it out um file version that should be let's just go whatever General survey version you've got I'm going to say 2210 which is going to be the latest you know what I don't think I have that emulator on here let's back it up to where it was about 20 21 10 is probably about right so we're going to say export so if I go to here terminal Business Center I go to documents Trimble Business Center SP to access open it up there is my job file right there I'm going to copy that and on your data collector you can go and triple access you can go to job data file explorer and it'll take you to the same place I'm fixing to take you so it will take you to um C drive C drive I'm going to program data I'm going down to Trimble somewhere Trimble okay in my case I'm going to go to this emulator projects field work there's all my jobs in there I'm going to say paste so I'm going to paste it in there so now I'm going to go to channel access let me look here I think I've got 20 2201 in there which is General survey 22.00 I may be In trouble I may not have went back far enough says it's in there open speed access open okay it's asking for a project right um project height is your ellipsoid height so basically what that is just say like 22 to 27 meters below your elevation right so you have your ellipsoid and your geoid together make your orthometric height so they're Asking for height which is your ellipsoid height this is so access can calculate basically between like grid and ground and stuff like that so I'm just going to say 200 is close enough for me I'm going to say accept and there's no points so I brought those into access so if we go and look job data file explorer see what I mean it brings you into the same spot um there's the jobs just FYI And if I go to uh Point manager there's my points there's one I brought them in so all that good stuff if I go and look at my job and SP to X says I'm gonna go to properties right now it's set on local site because I wasn't able to put that project in there okay so I could go in select from library I know what it's supposed to be So let's go down to let me grab that would be a lot easier if it did how about just use here on the keyboard and I'm gonna set my project to go in here I'm going to say m for Mississippi the east geoid model I don't see what I'm looking oh there it is okay I got you or no Project type 200 enter store accept and open okay so now everything is like it should be okay so now if I went back and I looked at my project under SP to access properties everything is exactly like it should be so let's go and make sure Um so let's look at some coordinates here let's look at um there's 100 let's click right here properties and then if I go here and we look so uh 36 221 83 859 2015.944 okay so now everything is Exactly like it should be so if you had a license a business center you could just go up there to um your local site stuff and local site settings and we could set our height but didn't say it was gonna be easy and I would really like for Trimble to put a converter in Access or An Origin one or in both would be great so that I can bring this Job file over to um to either one of them so since access and origin are pretty much the same thing so that my friends is how you're going to have to export out your job files and bring them in now another way is I could if I wanted to right here I could go back to home I'd go back to Export I could go to custom and I could go to Northern elevation uh Northern easting elevation and code and I could export those out as a CSV file the job exporter we looked at while ago you can't get to because of the license they're not making it easy on you to convert it so this to me is the best way to do it if you if you've got I've had this stuff in my computer for so long I don't know If this is something I built or it came with it I think it comes with it I think it comes automatically in business center but I'm not 100 sure that maybe you guys could ping me and let me know um but if you could use that that would actually export it as a CSV file at those points or like I said to get the access the other way didn't say it was going to be easy but that's how you can do it you can get it done you're not stuck okay so Um man uh heck of a Tuesday tip huh so um got a lot of things planned a lot of things I want to put together for you guys I've been meaning to get this out for like a month and I just haven't been able to get it done so I got that out um I put a podcast up um coat Ratliff Kevin Rainey my Mississippi sales guy and um myself we did a little podcast about triple Dimensions so uh it's on Spotify I saw it on Apple I didn't put it on YouTube um I just wasn't able to get the cameras put together Colt and I have decided we're going to try to get something done every week we've said this before but we are both so incredibly busy it's hard to do but we're gonna try to get something it may not be anything that spectacular but get something out there anyway so guys hope this helps Um I hope you enjoyed the video um like I said you can ping me you know on Facebook or on YouTube or whatever and um let me know if you have any questions if I need to do it like a follow-up with this because um like I said it's not the easiest thing in the world but it can be done so as always God bless take care of you guys uh take care of yourselves Um and uh I guess I'll see you guys on the next video as soon as I come up with an idea for another one take care</p></div>Block Contouring by Total station & Mapping By SW-DTM Softwarehttps://landsurveyorsunited.com/video/block-contouring-by-total-station-mapping-by-sw-dtm-software2022-07-18T00:19:46.000Z2022-07-18T00:19:46.000ZJustin Farrowhttps://landsurveyorsunited.com/surveyors/justin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/10652289889?profile=RESIZE_400x&width=400"></div><div><div>Detailed procedure of Block Contouring :</div>
<div>1.Introduction.</div>
<div>2.Instrument Setup.</div>
<div>3.Grid formation</div>
<div>4.Taking readings</div>
<div>5.Applications</div>
<div>6.Processing by SW-DTM and AutoCad. </div>
<div> </div>
<div>Walchand College of Engineering, Sangli </div>
<div>Department of Civil Engineering.</div></div>Land Mentor 2020https://landsurveyorsunited.com/video/land-mentor-20202020-10-29T18:13:00.000Z2020-10-29T18:13:00.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/8091905268?profile=RESIZE_400x&width=400"></div><div><p>Land Mentor Software is the first ever Holistic Software for Land Surveying and Planning.</p>
<p> </p>
<p><a href="http://landsurveyorsunited.com/hubs/landmentor">Visit Land Mentor Hub</a></p>
<p><a href="https://www.smarketplace.org/vendors/land-mentor" target="_blank">Visit Land Mentor Store inside Virtual Mall</a></p></div>Surveying Equipment, Total Stationshttps://landsurveyorsunited.com/video/surveying-equipment-total-stations2020-04-30T04:33:34.000Z2020-04-30T04:33:34.000ZChina Surveying equipment agenthttps://landsurveyorsunited.com/surveyors/kangbin<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/4574071471?profile=RESIZE_400x&ss=00%3A00%3A01.000&width=400"></div><div><h1 class="org-top-card-summary__title t-24 t-black truncate" title="Surveying Equipment, Total Stations"><span dir="ltr">Surveying Equipment, Total Stations</span></h1></div>HOW TO PLOT AN UNEQUAL DIMENSION PLOT IN AUTO CAD.https://landsurveyorsunited.com/video/how-to-plot-an-unequal-dimension-plot-in-auto-cad2020-02-18T20:04:16.000Z2020-02-18T20:04:16.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3871277633?profile=RESIZE_400x&width=400"></div><div><p>PLOT A MAP IN CAD. PLOT AN UNEQUAL DIMENSION PLOT IN CAD. FINDIND AREA OF PLOT.</p></div>Import and Export using Survey Prohttps://landsurveyorsunited.com/video/import-and-export-using-survey-pro2019-12-30T19:54:16.000Z2019-12-30T19:54:16.000Zjbirds.co for Surveyorshttps://landsurveyorsunited.com/surveyors/jbirds<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3794250949?profile=RESIZE_400x&width=400"></div><div><p>In this video we demonstrate how to import and export files using Survey Pro. <a href="http://www.fpisurvey.com">www.fpisurvey.com</a></p></div>Horizontal curve formulas and calculationshttps://landsurveyorsunited.com/video/horizontal-curve-formulas-and-calculations-12019-11-27T19:05:37.000Z2019-11-27T19:05:37.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3657208600?profile=RESIZE_400x&width=400"></div><div><h1 class="title style-scope ytd-video-primary-info-renderer">Horizontal curve formulas and calculations</h1></div>Curve coordinates calculation part#2https://landsurveyorsunited.com/video/curve-coordinates-calculation-part-22019-11-19T00:24:40.000Z2019-11-19T00:24:40.000Zjbirds.co for Surveyorshttps://landsurveyorsunited.com/surveyors/jbirds<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3719243164?profile=RESIZE_400x&width=400"></div><div><p>In this video we calculate the coordinates horizontal curve at required interval to watch part#1 please follow below <iframe src="https://www.youtube.com/embed/Ya4JGvbsvNA" width="560" height="315" frameborder="0" allowfullscreen=""></iframe></p></div>Civil 3D for Surveyors & Engineers Webinarhttps://landsurveyorsunited.com/video/civil-3d-for-surveyors-engineers-webinar2019-11-06T18:44:06.000Z2019-11-06T18:44:06.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3700401001?profile=RESIZE_400x&width=400"></div><div><p>Everyone talks about Civil 3D for the engineering community, but what about surveyors? In this webinar we will discuss the many aspects of survey functionality available to surveyors, and how you can automate field surveying. Now, if you’re an engineer reading this, and your about to ignore this webinar, don’t! This webinar will be good for engineers as well so that you are aware of the survey functionality in Civil 3D to better communicate with your surveyors. Come join us and take a peak behind the curtains of survey functionality in Civil 3D.</p></div>GIS Software Make Google Earth a Background of Smart Map Editor, Convert GIS Shape to HTML Googlehttps://landsurveyorsunited.com/video/gis-software-make-google-earth-a-background-of-smart-map-editor-c2019-08-31T20:31:33.000Z2019-08-31T20:31:33.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3495548833?profile=RESIZE_400x&width=400"></div><div><p><a href="https://freesmartgis.blogspot.com/p/making-google-earth-as-background.html" target="_blank">http://freesmartgis.blogspot.com/</a> GIS Software First African Arabian Egyptian Convert GIS Shape files to HTML Google Map Web GIS and Mobile GPS Application</p><h3 class="post-title entry-title">Making Google Earth as Background</h3><div class="post-header"> </div><div id="post-body-8448939225089322630" class="post-body entry-content"><div dir="ltr"><div><strong><u>Smart GIS free Download: </u></strong><br /><a href="https://drive.google.com/file/d/0B2qR4wxKKE_VUmR6V2hYRHRqb2c/view?usp=sharing" target="_blank">https://drive.google.com/file/d/0B2qR4wxKKE_VUmR6V2hYRHRqb2c/view?usp=sharing</a><br /><div><br /><strong><u>Suggested Google Earth free Download: </u></strong><br /><a href="https://drive.google.com/file/d/0B2qR4wxKKE_VUkRkeEV6NTYyT2c/view?usp=sharing" target="_blank">https://drive.google.com/file/d/0B2qR4wxKKE_VUkRkeEV6NTYyT2c/view?usp=sharing</a><br /><br /></div><u><strong>فيديوهات شرح منظومة سمارت جى اى اس </strong></u><u><strong>Smart GIS Tutorials Videos</strong></u></div><div><div><a href="https://www.youtube.com/watch?v=VhvJVWRHjUU&feature=share&list=PLiYk2HfoFlPV0ZdYbf3HeGEpmPeyZCEPW" target="_blank">http://www.youtube.com/watch?v=VhvJVWRHjUU&feature=share&list=PLiYk2HfoFlPV0ZdYbf3HeGEpmPeyZCEPW</a></div><div> </div><div><strong><u>How to Make Google Earth as Background?</u></strong><br /><strong>1 - Open Google Earth</strong><br /> Do the followning Google settings on the first time only<br /><ul><li>Tools-> Options Turn off Terrain </li><li>Be sure that North arrow is combletely very up </li><li> 1 - View-> Show Navigation -> Always</li><li> 2 - Press Double click in North</li><li>Be sure that the map is very flat by </li><li> 1 - Pressing keyboard Shift and keyboard up Arrow </li><li> 2 - Pressing Keyboard Ctrl and keyboard down Arrow</li><li>Be sure Google Earth is not maximized and is not Full Screen</li><li>Keep Google Earth Opened </li></ul><strong>2 - Open Elshayal Smart GIS Map Editor</strong><br /><ul><li>Open Your Geographic Lon-Lat Map project</li><li>Menu -> Tools -> Synchronize Google Earth with Geographic Lon-Lat Map</li><li>View -> Refresh Map</li></ul><strong>3 - Start drawing and digitizing in your Shape files over the Google Earth back ground Map</strong><br /><br /><br /><strong><u>تسجيل منظومة سمارت جى اى اس ايتيدا </u></strong><strong><u>Smart GIS Registeration in ITIDA</u></strong><br /><a href="https://login.itida.gov.eg/ViewProfileFull.aspx?ID=2814" target="_blank">https://login.itida.gov.eg/ViewProfileFull.aspx?ID=2814</a><br /><br /><strong><u>شهادات منظومة سمارت جى اى اس </u></strong><strong><u>Smart GIS Certificates</u></strong><br /><a href="https://drive.google.com/folderview?id=0B2qR4wxKKE_VflFBZk5mcTRneWRoTVhMLUlPTXZ6SXJuOUdfdFp6amMyQURHSlYxZUoyR0U&usp=sharing" target="_blank">https://drive.google.com/folderview?id=0B2qR4wxKKE_VflFBZk5mcTRneWRoTVhMLUlPTXZ6SXJuOUdfdFp6amMyQURHSlYxZUoyR0U&usp=sharing</a><br /><br /><br /><br /><br /></div></div></div></div></div>Local Coordinate to Real Coordinate in AutoCAD by Excelhttps://landsurveyorsunited.com/video/local-coordinate-to-real-coordinate-in-autocad-by-excel2019-08-24T20:56:59.000Z2019-08-24T20:56:59.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3445915416?profile=RESIZE_400x&width=400"></div><div><p>With the help of this video you will learn how to transform the Local coordinates or Arbitrary coordinates into Real coordinates with the help of AutoCad and Excel. With this method you can easily correct any rotational or scaling problem of your drawing while talliyng with the real coordinates. You can easily merge the drawing made by local coordinates into drawing by real coordinates.</p><p> </p><p>The method I have applied for transforming arbitrary coordinates to real coordinates is described below-<br />1) I have taken a sample data from a field survey which was collected by ETS instrument by assuming arbitrary coordinate 10000,10000. During the filed survey i have marked the points on ground and later i have taken real coordinate data of three point by using DGPS instrument.</p><p>2) Then in AutoCAD I plot the local coordinate data by applying an easy formula in excel and made a triangle with three arbitrary coordinate points of which we have DGPS point.</p><p>3) Then I opened another drawing in AutoCAD and drawn another triangle with the known real coordinate points.</p><p>4) After that I copied all data from first drawing with Copy with Base Point option and pasted it into the second drawing.</p><p>5) Then I used ROTATE / ALIGN Command in AutoCAD to solve the rotational error.</p><p>6) After merging local coordinate based drawing with the real coordinate drawing I applied LIST Command and exported all vertices from that drawing.</p><p>7) Then with the help of excel I arranged the real coordinates data.</p><p>8) and Finally our destination is ready.I have successfully converted Local coordinate data to real coordinate data.</p><p>Try this method in your work field and if any questions are there please feel free to ask. We will definitely try to answer you all. Thank you</p></div>How to import X Y coordinates from Excel to AutoCAD direct! (English)https://landsurveyorsunited.com/video/how-to-import-x-y-coordinates-from-excel-to-autocad-direct-englis2019-08-15T19:48:54.000Z2019-08-15T19:48:54.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3428129063?profile=RESIZE_400x&width=400"></div><div><p>In this tutorial you will learn how to import points (x,y) or Easting, Northing data from an excel data sheet to AutoCAD. I have shown two methods to import points in autocad from an excel file. Watch Part II : <a class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/watch?v=5caTa2JBj6E">https://youtu.be/5caTa2JBj6E</a> (How to import texts easily from excel to AutoCAD.) Watch the Part-III : <a class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/watch?v=9UF6mvyM6AY">https://youtu.be/9UF6mvyM6AY</a> (How to import Lines from excel to AutoCAD) You might know that excel is a very important tool for the engineers to make any drawing fast and easy in AutoCAD. I will apply the same here. I will use some easy commands and formulas that will make you understand and you will be able to import points with just a single click !</p></div>Virtual Surveyor 6.2 step by step [EASY]https://landsurveyorsunited.com/video/virtual-surveyor-6-2-step-by-step-easy2019-08-07T21:51:01.000Z2019-08-07T21:51:01.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3412949097?profile=RESIZE_400x&width=400"></div><div><p>Get up and running with Virtual Surveyor 6.2 step by step:<br /><br />1) Clipping<br />- You can cut off part of your orthophoto and DSM with a boundary and make a nice and clean clip of your project area. <br /><br />2) Mosaics<br />- You can now merge multiple smaller processed chunks of orthophotos and digital surface models (DSM) into a single project and create smooth edges between these pieces. This seamless mosaic can be exported to a new tif file or serve as the basis for a full area virtual survey.<br /><br /><br />3) Renumbering<br />- You can select one or multiple survey items in the data set and automatically (re)number them sequentially from any chosen starting number.<br /><br />4) Export volumes<br />You can set the surface to be displayed and exported as outlines only. Exporting to a shapefile will include the volume measurement in the attribute table.<br /><br />5) Select within<br />- You can trace around an unwanted feature, such as a water body, and delete that object and all the points within it.<br /><br />6) Contours<br />- Working with contours changed. Contours are now a style property for a surface and are not created as a seperate items.<br /><br />7) Hulls<br />- Creating a surface for a curved motorway is now as fast and simple as creating section lines. The concave hull functions allows the user to select the section line and the rounded boundary of the curved area is generated automatically. <br /><br />8) Extract points<br />- Extract the vertices from breaklines to points and create annotations for each vertex of your breakline.<br /><br />9) Fly throuhgs<br />- You can select way points and create a movie that allows the viewer to fly through the terrain in three dimensions.<br /><br /><br />Do you want to start a trial or need more information? <a href="https://www.virtual-surveyor.com">https://www.virtual-surveyor.com</a><br /><br />Virtual Surveyor is Smart Drone Mapping Software.</p></div>Land survey :- Solving line of collimation table.https://landsurveyorsunited.com/video/land-survey-solving-line-of-collimation-table2019-07-16T17:13:41.000Z2019-07-16T17:13:41.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3300172440?profile=RESIZE_400x&width=400"></div><div><p>hi dears ! welcome back to SLK's tuts. here in today section we will be learning in detail the solution problem of H.I or line of collimation table, we will solve the table and then we will apply calculation check to prove our calculation is okay.</p></div>Coordinate Entry Methodshttps://landsurveyorsunited.com/video/coordinate-entry-methods2019-07-16T17:03:47.000Z2019-07-16T17:03:47.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3300011521?profile=RESIZE_400x&width=400"></div><div><p>Entering coordinates in AutoCAD using the absolute, relative, polar, polar tracking, and dynamic input methods.</p></div>Building a Geospatial Data Hub with MarkLogichttps://landsurveyorsunited.com/video/building-a-geospatial-data-hub-with-marklogic2019-07-12T22:09:48.000Z2019-07-12T22:09:48.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3278261916?profile=RESIZE_400x&width=400"></div><div><p>80 percent of government data has a geospatial component. But, differences in how that data is stored and accessed has created GIS silos. To get a 360 view of your data, you need to integrate all of it, including the geospatial data and its context. In this session, we will showcase how to accomplish that goal using a MarkLogic Data Hub together with Esri. The MarkLogic Data Hub integrates, stores, manages, and searches all of your data and Esri, the industry leader in location intelligence, provides the tools for geospatial analytics. You will get an overview of what makes it unique and see a demo of the integration to understand how it enables better decision making.</p></div>Creating Easting and Northing Coordinates in AutoCADhttps://landsurveyorsunited.com/video/creating-easting-and-northing-coordinates-in-autocad-12019-07-05T22:23:12.000Z2019-07-05T22:23:12.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/3201374314?profile=RESIZE_400x&width=400"></div><div><p>Using AutoCAD to create automatic survey coordinates using simple text and points</p></div>Google Earth: How to use Headings & Bearings on Survey for Property Boundaries - Conversionhttps://landsurveyorsunited.com/video/google-earth-how-to-use-headings-bearings-on-survey-for-property-2019-06-18T03:02:45.000Z2019-06-18T03:02:45.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/2979897417?profile=RESIZE_400x&width=400"></div><div><p><strong>Note: This is no substitution for hiring a Professional Land Surveyor. This is for educational purposes.</strong></p><p>This video shows how to convert your bearings on a survey to get something you can use in Google Earth (heading) when using the ruler tool. Using a little math, you can convert those bearings and get a usable decimal degree for GE. This is best used with a property survey. Check it out!</p></div>Bearing Calculation from coordinates / Surveying / Excel sheet downloadhttps://landsurveyorsunited.com/video/bearing-calculation-from-coordinates-surveying-excel-sheet-downlo2019-05-08T19:12:27.000Z2019-05-08T19:12:27.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/2365065388?profile=RESIZE_400x&width=400"></div><div><p>With this excel file you can calculate Distance and Bearing from coordinates easily, just you have to input the Easting and Northing values only. I have created this excel spreadsheet to calculate BEARING and DISTANCE when we have easting northing coordinates of points. Download Link bellow Coordiinate2Bearing.xlsx Download Link : <a class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/redirect?event=video_description&v=AQdk-kwCrSs&q=https%3A%2F%2Fgoo.gl%2FGGhiCr&redir_token=NZrsLhpO8KxAovgaC1GAyTCoEYZ8MTU1NzQyODk3NUAxNTU3MzQyNTc1" target="_blank" rel="nofollow noopener">https://goo.gl/GGhiCr</a> Full version is uploaded at <a rel="nofollow" class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/watch?v=Il9-PahyNkk">https://www.youtube.com/watch?v=Il9-P...</a> Full version Download Link: <a class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/redirect?event=video_description&v=AQdk-kwCrSs&q=https%3A%2F%2Fgoo.gl%2FH2g83G&redir_token=NZrsLhpO8KxAovgaC1GAyTCoEYZ8MTU1NzQyODk3NUAxNTU3MzQyNTc1" target="_blank" rel="nofollow noopener">https://goo.gl/H2g83G</a> (With this excel version you can calculate bearings from a list of coordinates) Originally the above file is regarding Traverse Calculation excel sheet download/Traversing/Closed Traverse/Bowditch Rule Full version at: <a class="yt-simple-endpoint style-scope yt-formatted-string" href="https://www.youtube.com/redirect?event=video_description&v=AQdk-kwCrSs&q=https%3A%2F%2Fgoo.gl%2FH2g83G&redir_token=NZrsLhpO8KxAovgaC1GAyTCoEYZ8MTU1NzQyODk3NUAxNTU3MzQyNTc1" target="_blank" rel="nofollow noopener">https://goo.gl/H2g83G</a></p></div>Civil 3D Tutorial 1: Pointshttps://landsurveyorsunited.com/video/civil-3d-tutorial-1-points2019-04-21T19:12:32.000Z2019-04-21T19:12:32.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/2116505120?profile=RESIZE_400x&width=400"></div><div><p>Part 1 in this series introduces how to import points into AutoCAD Civil 3D.</p></div>Residential community surveyinghttps://landsurveyorsunited.com/video/residential-community-surveying2019-04-21T19:11:02.000Z2019-04-21T19:11:02.000ZAxeMen Site Prephttps://landsurveyorsunited.com/surveyors/AxeMenSitePrep<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/2116489498?profile=RESIZE_400x&width=400"></div><div><p>Residential community surveying case study - Property Taxation Mapping <a rel="nofollow" href="https://www.datumate.com/case-studies/residential-community-surveying/">https://www.datumate.com/case-studies/residential-community-surveying/</a></p></div>Работа с контроллером GT2https://landsurveyorsunited.com/video/gt22019-02-25T15:12:53.000Z2019-02-25T15:12:53.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200812239?profile=RESIZE_400x&width=400"></div><div>Работа с контроллером GT2. Очередной этап развития технологии ведения разбивочных работ. Изначально планировал создать видео только о удобстве формирования разбивочника, а в результате получился полноценный отзыв. Ну знать -тому так и быть.... Related to this question: <a href="http://landsurveyorsunited.com/forum/topics/question-from-developer-of-field-controller">http://landsurveyorsunited.com/forum/topics/question-from-developer-of-field-controller</a>
</div>3Dsurvey_How_it_workshttps://landsurveyorsunited.com/video/3dsurvey-how-it-works2019-02-25T15:12:48.000Z2019-02-25T15:12:48.000ZTomaž Izakhttps://landsurveyorsunited.com/surveyors/TomazIzak<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200811692?profile=RESIZE_400x&width=400"></div><div>Movie is presenting work flow with drone, camera and 3Dsurvey software. The work of Land surveyors become more efficient, les time consuming and accurate.</div>AutoCAD to KML / AutoCAD to Google Earthhttps://landsurveyorsunited.com/video/autocad-to-kml-autocad-to-google-earth2019-02-25T15:12:29.000Z2019-02-25T15:12:29.000ZSoumen Samantahttps://landsurveyorsunited.com/surveyors/SoumenSamanta<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200809095?profile=RESIZE_400x&width=400"></div><div>View autocad drawing in Google Earth Pro by creating KML file from Autocad DWG or DXF files. In this tutorial I have shown the methods for autocad to KML wit...</div>Introduction to CORPSCONhttps://landsurveyorsunited.com/video/introduction-to-corpscon2019-02-25T15:12:25.000Z2019-02-25T15:12:25.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200808393?profile=RESIZE_400x&width=400"></div><div>coordinate converter AirTopo
</div>New Vendors Hub on Land Surveyors Unitedhttps://landsurveyorsunited.com/video/new-vendors-hub-on-land-surveyors-united2019-02-25T15:12:20.000Z2019-02-25T15:12:20.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200807866?profile=RESIZE_400x&width=400"></div><div><p><a href="http://landsurveyorsunited.com/hubs/vendors" target="_self">http://landsurveyorsunited.com/hubs/vendors</a> A New Vendor Group Hub for Posting Deals, Special Promotions and Discounts has been added just for you! Share Your Specials and We'll Share Your Post! Use this hub to post your specials and discounts by CREATING A NEW DISCUSSION inside this group. The more information you include the higher your chance of having your post FEATURED and shared to other social media sites.</p>
<p style="text-align: center;"><span style="font-size: 14pt;"><strong>A New Vendor Group Hub for Posting Deals, Special Promotions and Discounts has been added just for you!  Share Your Specials and We'll Share Your Post!</strong></span></p>
<p><a href="http://landsurveyorsunited.com/group/vendors" target="_self"><img class="align-full" src="{{#staticFileLink}}1200807683,original{{/staticFileLink}}" width="100%" /></a></p>
<p><a href="http://landsurveyorsunited.com/group/vendors" target="_self"><img class="align-right" style="padding: 10px;" src="{{#staticFileLink}}1200807748,original{{/staticFileLink}}" width="250" /></a><strong><a href="http://landsurveyorsunited.com/hubs/vendors" target="_self">This new hub</a> for vendors will allow you to run special promotions just for Land Surveyors United members</strong>.  Use this hub to post your specials and discounts by <a href="http://landsurveyorsunited.com/hubs/vendors/forum/topic/new?target=http%3A%2F%2Flandsurveyorsunited.com%2Fgroup%2Fvendors" target="_self">CREATING A NEW DISCUSSION</a> inside this group.  The more information you include the higher your chance of having your post FEATURED and shared to other social media sites.</p>
<p> </p>
<p><strong>NOTE</strong>: We are beginning a process for which there exists no example to follow.  We would like for you to grow with us.  This is essentially <strong><span style="text-decoration: underline;"><em>Phase One</em></span></strong> of our upcoming <strong><em>Surveyor Marketplace</em></strong> which is integrated into the new and improved site soon to be released. Vendors who post inside <a href="http://landsurveyorsunited.com/hubs/vendors" target="_self">this Hub</a> will have access to the Marketplace Roadmap. By posting discussions about your specials inside this group you will be the first to know about future phases, other advertising opportunities within the community along with insights and perks.</p>
</div>Export coordinates at equal intervals from a centerline | AutoCAD to Excel | MEASURE Commandhttps://landsurveyorsunited.com/video/export-coordinates-at-equal-intervals-from-a-centerline-autocad2019-02-25T15:12:17.000Z2019-02-25T15:12:17.000ZSoumen Samantahttps://landsurveyorsunited.com/surveyors/SoumenSamanta<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200807399?profile=RESIZE_400x&width=400"></div><div>Helpful tutorial for civil and survey enginners. In this video I have discussed about the MEASURE command in AutoCAD. I have shown the methods of how to get ...</div>Traversing with Distance and Bearing in AutoCAD | Excel to AutoCAD | Surveyinghttps://landsurveyorsunited.com/video/traversing-with-distance-and-bearing-in-autocad-excel-to-autocad2019-02-25T15:12:12.000Z2019-02-25T15:12:12.000Z⚡Survenator⌁https://landsurveyorsunited.com/surveyors/Survenator<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200806966?profile=RESIZE_400x&width=400"></div><div>In this video I have shown direct method of how to create a Traverse map when we have only distance and bearing with us. I have showed a direct method by which you can draw the traverse line with just copy and paste. I used some easy formula in excel for this. SUBSCRIBE us (its free) <a href="http://www.youtube.com/c/LearnExplore/">http://www.youtube.com/c/LearnExplore/</a> check our other tutorials below How to import X,Y co-ordinates from Excel to AutoCAD! (English) <a href="https://youtu.be/9kSg8mpF6n0">https://youtu.be/9kSg8mpF6n0</a> How to Import Texts from Excel to AutoCAD! (English) <a href="https://youtu.be/5caTa2JBj6E">https://youtu.be/5caTa2JBj6E</a> How to Create a Topo Map by using Excel and AutoCAD (English) <a href="https://youtu.be/9UF6mvyM6AY">https://youtu.be/9UF6mvyM6AY</a> Export X,Y,Z co-ordinates from AutoCAD to Excel [English] <a href="https://youtu.be/jxZNFYwEvGQ">https://youtu.be/jxZNFYwEvGQ</a> Bearing and Distance Calculation from Easting, Northing | Excel <a href="https://youtu.be/AQdk-kwCrSs">https://youtu.be/AQdk-kwCrSs</a> [Surveying] Bearing Calculation in excel <a href="https://youtu.be/-BOj-hJynBc">https://youtu.be/-BOj-hJynBc</a> How to convert Lat, Long to UTM (Easting,Northing) | by QGIS Software (English) <a href="https://youtu.be/wQtylb5mzjU">https://youtu.be/wQtylb5mzjU</a> What's the difference between accuracy and precision? <a href="https://youtu.be/cpbDusPVxR0">https://youtu.be/cpbDusPVxR0</a> Land Survey data collection by Mobile Topographer Application (Mobile GIS) <a href="https://youtu.be/FXYejcLgCzQ">https://youtu.be/FXYejcLgCzQ</a> Coordinate System in Surveying (Calculation of Easting and Northing) <a href="https://youtu.be/VCDC78wpuJc">https://youtu.be/VCDC78wpuJc</a>
</div>Land Survey data collection by Mobile Topographer Application (Mobile GIS)https://landsurveyorsunited.com/video/land-survey-data-collection-by-mobile-topographer-application2019-02-25T15:12:12.000Z2019-02-25T15:12:12.000ZSoumen Samantahttps://landsurveyorsunited.com/surveyors/SoumenSamanta<div><img src="https://storage.ning.com/topology/rest/1.0/file/get/1200806927?profile=RESIZE_400x&width=400"></div><div>In this video I have discussed the methods of how to collect field survey data in surveying by using your mobile phone GPS service. √[Note: This method is no...</div>