Standard Symbols for site facilities
Hi guys,
could you pleas guide me how to show the site demolished walls and inlet outlet according to the standard symbole in a topographic map.
Ā
Ā
Thank you.Ā
Read moreā¦Hi guys,
could you pleas guide me how to show the site demolished walls and inlet outlet according to the standard symbole in a topographic map.
Ā
Ā
Thank you.Ā
Read moreā¦Hi guys,
I am a bit confusing with the naming of the bechmarks when there be tow or more BMs those are share between tow travers, would we have to name them the same? or we have the option of give name the deffrent name for each travers?Ā
thanksĀ
Read moreā¦Ā
hey guysĀ
what is your oponion regarding a site of about 5.5 hectars to be surveyed by total station and a 3d Scanner, would both of them will got fixed and come exactly togather or some deference is tolerable?
the leghnt of the area is about 0.5 k
Read moreā¦Hy Guyes,
looking for recomendation, There is needed of taking croos section along the river of 1.6 km (every each 5m section), for best of accuricy proposes is there needed to extend a closed travers or any? the area around has been surveyd and there
Read moreā¦Hi there,how to connect TS11 to a Bluetooth supported devices, such as android mobile phone to share data between them?when I wana connect them mobile device not show any active Bluetooth supported devices.Best.
Read moreā¦Ā
hy guys,
any budy knows that leica total station model TS11 has it'd own termametr? if so how to access that?
ThanksĀ
Ā
Read moreā¦Hi There!
I am searching for some objects standard symbol in the site, I would be glad if any one help me in this way,Ā
structure electric pole(Rectangular shape as picture below), sign boards standard symbol( beside the road) andĀ Mosaic path standard
Read moreā¦Hey Surveyors!
I have surveyed a land about km square with complected details(roads, streets, buildings, T-Walls, Manholes, Corners etc) but with no traverse extension at the first, now when i have completed it and reached to the first area I was star
Read moreā¦hello every body,
i have measured three times a traverse for a land of area of about 0.5km sequre but for every time the BMs come different from the other one, while during measurements the accuracy is up to 2-3mm in horizontal location, any body know
Read moreā¦hey guys!
any one here to describe with fully the total station lieca TS11 setup and surveying procedure?
Bes
Read moreā¦Hey Surveyors!
I have surveyed a land about km square with complected details(roads, streets, buildings, T-Walls, Manholes, Corners etc) but with no traverse extension at the first, now when i have completed it and reached to the first area I was star
Read moreā¦Hey Gus!
I have faced with a problem at site surveying by Leica TS11, no traverse are created but reading change points with 1-4 mm horizontal accuracy the area are about 20Hrs,
the problem is when i come back surveying the site to the start location t
Read moreā¦Hi
Do any one know which side of the Leica total station ts11 is for measuring the instrument hight, During station setup?
Cuz there are different amount when measure from BM under instrument to point market on the up left and right side of the ts11.
Hey guysĀ
I have done a survey 4 months ago, but for accuracy proposes when I repeat it again with tow kinds of prism (in total station menu was selected just mini prism).
1 Lieca round prism
2 lieca mini prismĀ
But the result shown me the objects reloca
Read moreā¦Hi,
any way to fix a topographic surveyed map upon a 3D scan survey?
I have surveyed a site and the site surveyed by 3D scan as well, so there are deference in the location of objects in the site between them, but not equal in deference part of the sit
Read moreā¦Hi Guys,
looking for some site elements symbols, when drawing them in civil 3d, due to small scale some of objects may not be drawn but it should be shown by symbols,Ā
any suggestion default symbols for advertising board at streets, water valve, and sm
Read moreā¦Hey guys!
My work area as you see below image, contains rural buildings, concreted and none concreted streets, hills, etc, there is needed surveying for rebuilding and renewing the area, so how you suggest survey methods and procedures as well points
Read moreā¦Hy guys!
as you see below civil 3d 2017 does not show up the real surface or figure of ground, based on the data(points of that site) here the blue line represent a ditch (that have about 30CM depth and the tow sites are concreted level surface), so t
Read moreā¦Hi, every body I am using Garmin handy GPS with low accuracy to establish BMs but there is needed high accuracy for this survey, but i am not able for now to have a high accuracy GPS due to time shortage, and there is plane to buy a high accuracy GPS
Read moreā¦