"Easy way in cad would to just draw a line between your two points. Select all points and the line in the drawing and rotate everything 180 from the midpoint in the line. That should hold all your elevations and correct your backsite angle. Only gets…"
"Traverse PC has a student version. It is not a system hog like CAD and comes with better COGO features built in. I use both C3D and Traverse PC at my job. TPC also has its own how to use videos to make it simple."
"A stand alone base setup like you are talking about both base and rover need to be able to pick up GNSS.
You also could also use the same rover on a VRS network. Only if the VRS moint point is GNSS capable will you benefit."
"If you have a R8 model 3 on the base it will broadcast the GNSS to your rover. Your rover will also need to have GNSS capable another R8 model 3. I use the same setup and it works great. Just needed to set the base setting to use the R8 and check…"
This is a KMZ that will overlay the Townships to the USA. Something useful for a quick look and see what area your working on. Or to check what township / section the area is going to be in with Google Earth. "
"Well boundary location, LLA, TOPO, Section retracement, GPS, Total Station, Then draft the maps. Have to say we do get some good photos in the field. And some of the stories when you have worked in the field long enough can be good also. This is…"
"Glad you joined us Aaron! If you haven't yet seen the Getting Started page that is a good place to start and over the past week I have made a couple of introductory videos for the community you might like to check out..