Custom coordinates system in TSC2

Hello,

Does any one know how to create a custom projection files on TSC2, I'm using the 12.22 version wich do not provide my grid in the Library, So I'm wondering if is it possible to add my grid to avoid typing parameters every time.

Thanks

Trimble ProXT Reset to Factory Defaults

to all,

I have a Trimble Pro XT receiver and I cannot communicate to the device using a serial cable. I had the serial communication to the receiver working. I then must of set the nine pin serial port on the receiver to be output only, because now I

Trimble TSC3

Switched on controller today and it hangs on the Boot Loader screen .......... Holding down the power button does not bring up the usual reset, clean screen options, holding it down a bit longer appears to reset but again gets stuck on the Boot Loade

Trimble Pro XRS newbie question

Hello,

I'm hoping someone here can help me with getting some old Trimble equipment to work, please?

I'm not a professional surveyor, although was very many years old, and have no experience of using GPS kit, so please forgive my ignorance.

I bought a

Trimble 5600 Robotic Radio

I have a Trimble Robotic 5603 (internal 2.4GHz radio) I have tried to connect to TSC2 running Trimble SCS900 software and get incompatible radio error message.

Support says no, the internal radio on the TSC2 is not compatible with the radio in the 560

GPS TBC vs Excel calculation experiment

Hi everyone,

I´m doing some kind of experiment with an excel spreadsheet:

1-GPS ECEF adjusted coordinates converted to a local model based on height control points, using excel and only rotating and moving the adjusted ECEF points (no scale adjustement

trimble total station 3605 dr

hi

my trimble total station switches off by itself abruptly, i have tried to configure it but still the problem persist. imagine you are in the middle of the work and suddenly the machine cut off power.

Trimble 5600 Service Tips/ batteries

Did you know? (Service Tips)

• If your Trimble Geodimeter Series 600 or 5600 displays an "Internal Memory Battery Expired" message, the internal memory backup batteries must be replaced as soon as possible or you risk the loss of the Firmware, BIOS, Hex

TSC3 & R8 COMBO JUMPING BETWEEN RMS AND 5HZ

hello all just started having an issue. when staking out points or lines the qualities on the bottom of the screen are staying low but is jumping out of rms and into 5hz. i have been told that this is due to poor signal strength. also i should add th

Another TSC2 issue

Our TSC2 now will not connect to the rover or the base station at all, (if you have been tracking the story we discontinued use of the bluetooth and connected it directly to the base and then the rover.) When we try to connect to the base we do all o

TSC2, BLUETOOTH

My TSC2's Bluetooth won't stay on, does anyone have suggestions?  

Trimble GeoXT 6000 need information from backgroud files.

I would really like to be able to tap on a feature and have it tell me what it is, but that function does not exist in Terrasync I see. Has anyone have a solution that they use.

What I need is to make my roads and stream different colors as well as my

TBC - Adding Antenna Models

OK so I have decided on TBC for my post-processing campaigns. I need to add an antenna model (Magellan NAP100 / Promark 3). Has anything been improved recently for defining models through the antenna.ini file or is it pretty much the same routine as

Trimble HPB450 radio - Unable to connect to base radio

I have a new HPB450 radio but I am unable to get it to connect to my receiver. Here's my setup: RTK Mobile Base Trimble TSCE controller (Survey Controller software) Trimble 5700 receiver Trimble HPB450 radio When I try to connect the 5700 to the radi

Trimble R7 R8 User Manual and Setup Guide

With all of the members on the network who use the Trimble R8 receiver for GPS, and a couple of manual requests for the R8 this week, i figured it was about time to make a post providing the user manual and set up guides for the Trimble R8.

Trimble R

Help with Post correcting GLONAS data from a Geo 6000

I have some data from our new Geo 6000. I can not correct the data properly. I have a GLONAS base station as a refrence but my data dose not look good, and my points are all tossed out. So I am left with features that once held 150 postions now have

Trimble 4000 SSI GPS Assembly- Interactive Guide

Set up the Trimble 4000 SSI GPS

A Guide for Setting Up Trimble 4000 SSI GPS equipment -Use Tool Here
The Trimble 4000 SSI will have to be carefully set up for GPS surveying. It consists of a number of parts which have to be assembled in the correct o

Trimble JOB files

Has anyone else had the problem of converting a trimble job file on the TSC2 using survey controller software to a RW5 file when you have more then 5000 points? This has happened twice to me and once to another party chief in our company. I cant seem

Trimble Business Center Guides and Manuals

If you're looking for training manuals, guides or workflows for Trimble Business Center guides and Manuals, I found a TON of helpful documents on the UNLV website:

• Adjusting the Network.pdf
• Importing Digital Level Data.pdf
• Importing GNSS Dat

Trimble M3 Total Station User Manual

Trimble M3 Total Station User Manual