This group is for LSU members who use Trimble in the field. This group is for discussions and tutorials related to Trimble user. LSU is not directly affiliated with Trimble and all logos and imagery are copyright of their respective owners.
Follow Trimble Hub
Surveyor Community Forums (66)
TRIMBLE 5600 CU REPAIR (GEODIMETER)
DOES ANYBODY KNOW OF A INSTRUMENT REPAIR FACILITY THAT WILL WORK ON THESE? PREFERABLY IN S.C.. THE TRIMBLE PEOPLE DON'T SUPPORT IT ANYMORE. THEY WILL WORK ON THEM BUT THEY ONLY REPLACE PARTS, WHICH ARE GETTING HARD TO FIND. THEY WON'T TRY TO FIX A CO
Read more…TSC3 SCS900 Advance measurement module. Closing Traverse Loop
Hi,
I am using SCS900 on a TSC3 with Advance measurement module activated. There was a function in total station setup where I can measure control network. Did anybody know how to define the station when I am closing a traverse loop? Currently I can't
Read more…Trimble XRS 2.30 Pro, Pathfinder 4.00
I'm using a Trimble XRS GPS with Terrasync 2.30 Pro. I would like to enter state plane coordinates into the hand held logger, and then use the navigation function to locate said coordinates in the field. Can someone point me in the right direction, o
Read more…TSC3 DATALOGGER CALIBRATION FILE TRANSFER
If I carry out site calibration on with a TSC3 datalogger,
HOW DO I COPY THE CALIBRATION FILE TO ANOTHER DATALOGGER( WHAT IS THE FILE EXTENSION OF THE CALIBRATION AND WHERE WILL IT BE SAVED)?
2. CAN I SAVE THE CALIBRATION ON A PC AND USE IT IN THE NEAR
Read more…attribute display in txt file
Hey guys,
I'm trying to get my trimble style sheet to put my atribute before my code in the output.
code= settlement plate condition -->only 8 different conditions K01
attribute= settlement plate number -->about 250 plates 1206
if i u
Read more…Calibrating a Trimble S8 total station
I've recently started using a trimble s8 total station and I'm having problems completing calibration steps. I can't understand the instruction in the manual for adjusting the trunnion and I'm not able to calibrate the auto locking because the instru
Read more…Trimble 5603 Connection Question
Please see the pictures in this post below before reading.
Hello there guys. I have experience running an s3 total station, an s6, and various leicas like 403, 1103, Ts06, but I recently purchased this older gun the 5603 robotic. It came with no li
Read more…Trimble 5503 Remote Target 602
Hi,
Can anybody tell me is Trimble 5503 Total Station working with auto lock using Remote Target 602 (Trimble)?
Instrument has no radio on board, only servo.
Thanks!
Read more…TRIMBLE TSC3 DATALOGGER
Guys,my the touchscreen of my tsc3 logger is irresponsive,I tried several times to align the screen but to no avail.Someway somehow,my screen is locked and I can't do a thing with the logger!! Now,I think maybe just maybe I can get something going if
Read more…TSC3 DATALOGGER
What could possibly cause the loss of field data from the TSC3 datalogger?
Whenever I open the point manager window of the job,my pickups for a particular day display blank coordinates. The point names and codes are however displaying and whenever I t
Read more…Differential Correction Issue in Trimble 5.4 with GLONASS effects GPS Accuracy
I am working with survey data collected with a Trimble Geo6000 series GPS unit and post-processed in Trimble GPS Pathfinder 5.4 and have encountered an issue with differential correction dropping GLONASS satellites. The ssf file shows that data was c
Read more…Viewing DOP values in Trimble Business Centre
I work on TBC 2.5. Is there a way to view the various DOP values of the data as at the time of recording ?
Read more…Transformation State Plane Coordinates to Local Coordinates Survey Controller TSC2
Hello Fellow Surveyors,
I am using a Trimble TSC2 data collector. The place where I work has a local coordinate system. When I create a new job:
Coord System Local Site
Units US Survey Feet
Linkesd Files None
Active Map
Read more…Upgrading SCS900 on my ACU
Hello,
I'm trying to upgrade the SCS900 software on my ACU but it says that there's not enough memory. Any suggestions as to how I can free up around 18MB?
Many thanks,
Dobbs.
Read more…Attribute Display in New Points Spreadsheet TBC ?
Hello Fellow Surveyors,
Can anyone tell me how to set defaults so that Attributes entered in the field with codes are displayed along side Pt numbers in the New Points Spreadsheet in TBC ?
New Points Spreadsheet
Point Northing Easting Elevatio
Read more…Enter Field Codes or Library to TSC2 ?
Hello Fellow Surveyors,
Could someone please help me with this....I am setting up a survey enviroment in Civil 3D 2012 from field codes, symbols, description keys, point styles...everything is going great. I am entering all my codes into a text file i
Read more…tsc2 controller link to verizon mifi jetpack
We've tried everything we can to link the two with no results. Looking for a few tips to get this thing going. The controller uses Windows Mobile Version 5.0. I believe all my settings are correct but I just can't get it to connect. Any help would be
Read more…Trimble Users
- Land Surveyor
- Land Surveyor
- Not a Surveyor
- Not a Surveyor
- Not a Surveyor
- Land Surveyor
- Land Surveyor
- Government Professional
- Retired Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Student Surveyor
- Survey Legend
- Land Surveyor
- Government Professional
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- GEO Ambassador
- Government Professional
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Not a Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Land Surveyor
- Government Professional