Earth's Largest Land Surveyor Community
I am using an HP IPAQ to do rtk work with these machines, no problem.
Any ideas would be helpful.
This Content Originally Published by a land surveyor to Land Surveyors United Network
How the data collector should be connected with the receiver, cable, radio or wireless?
It could be a bluetooth sync problem between two or more connections. Try removing one of the devices to see if helps. I generally run into this problem between my GPS unit and laser range finder while syncing to a tablet.
Make sure you have the same port and baud rate selected on both.
The units use cables
I'm just gonna add this though I'm sure you've done it already:
Be sure the connection type is set to "cable" and not Bluetooth etc.
Get rid of the HP IPAQ. Why6 are you using that when you have an allegro controller to work with???
I second the check baud rate etc.
When I have trouble sometimes a complete shutdown of Allegro and restart fixes all connections issue.
But Baud Rate must be correct. Mine are 9600
I know Carlson for some reason changes the radio Baud to 38400 and in my Sokkia 2650LB, PDL radio must be 9600, Com 1
Not sure what your setup is supposed to be though.