Replies to This Discussion

Permalink Reply by Adriaan van Jaarsveldland Survey on September 1, 2015 at 10:22am

What Are you trying to download? If only the coords then output from the TCR705 as an ascii file, else let me know.

Permalink Reply by Rui Cristiano on September 1, 2015 at 10:26am

Yes I output only the coords, but I always used de "Leica Geo Office" to do so. Is it possible to output the ascii file directly to my PC without using any intermediat software?

Permalink Reply by ⚡Survenator⌁ on September 6, 2015 at 6:44pm

Perhaps if you do not get the solution you need, you might ask the other members inside the Leica Support Group as they are the ones who have most likely encountered this issue before.

Permalink Reply by ⚡Survenator⌁ on September 6, 2015 at 7:18pm

attached is the Leica manual for you

∗Was this resource helpful? Show your appreciation with a comment below. 

Donations are how we exist and grow for the surveying community worldwide.

• Leica_tps700_user_manual_en.pdf, 3.9 MB

Permalink Reply by Jim.oneill7 on July 2, 2016 at 5:53pm

Hi Rui, not sure if you got a solution to your problem but I have experienced similar issues. If you still require to use older software within a new laptop (Windows 8/10) I suggest using a virtual machine on this laptop. Explore the use of virtual box (free software) for installing a Windows xp or 7 operating system (install windows .iso file within virtual box) on your current Windows 8/10. You can then install your older software within this virtual machine and keep working as you were familiar with.

Permalink Reply by William Robinson on July 3, 2016 at 3:08am

I haven't done this for a while now, but just a thought. When you've got the instrument hooked up via the download cable can you access the instrument memory via my computer to get the files you need and then do some conversion?

Permalink Reply by Billy Brooks on September 3, 2016 at 12:15pm

This is the big ?, Can you get good copy's  of windows 7 and your Leica program.Because you can install windows 7 as a second operating system on your new computer. there is also a possibility   that if you can install the Leica Program on windows 8 then you can run it in compatibility  mode.you can try these.