We set our Leica System 1200 GPS base station on a new control point using the WGS'84 coordinate system and hit a "here" key thus receiving a Lat/Long/Ell. Ht. for that point.  Then we spent all day tying the boundary and new site control to be post-processed and brought to state plane coordinates, modified to ground.  The problem is that in our haste to get back to the office, the base was moved off of the point (10-15 feet to the back of the truck to pack it up) before we hit "stop" to stop logging raw data. 

 

Is there a way in LGO to "edit out" the last minute of the observation (when the base was moved) before we process the data?  I have used TGO (Trimble) in the past, and know that you can edit out portions of an observation (cycle slips etc.), and I figured LGO would have a similar option.  But try as I may, I cannot find a way to do it.  I have to figure that moving the base while it was still logging raw data would affect its determined position, and thus all of the observations made using it as a reference.  Any ideas?

This Content Originally Published by a land surveyor to Land Surveyors United Network

Views: 769

See Your Saved Posts Timeline

Replies to This Discussion

Kevin,

 

I'm not sure if you can edit out static observables (I am using V7 LGO) but the other option is to convert the file to Rinex and edit out the observables in the Rinex observation which is easy to do.  I usually convert all my static files to Rinex anyway because I use various CORS sites (and our own Leica base station data).  You do have to have the Rinex option which is a purchased LGO option.

 

Good Luck,

Terry

Terry,

 

Thank you for the repy.  We also usually convert to Rinex.  How do you edit out the observables in the Rinex observation?

 

Thanks,

Kevin

Kevin,

 

Basically you go to the bottom of the .O11 (observation file) and delete the last few minutes of the file - save the original Rinex observation file before editing. This web link will help you figure out the Rinex format - in this case Peter edited the beginning of the Rinex file:

http://www.plazio.net/GPS/ProblemOPUS.htm

Your editing will require removing entire epochs which contain the GPS observables. Those epochs begin with a date and time.

 

Good Luck,

terry

I think there is a way to not consider the logging time when your gps unit in base station accidentally logging observations way out of the base station. In South brand single frequency unit we simply block the observations which is out of the base stations. This is also can be done in trimble pathfinder mapping grade software. 

Good afternoon dear colleagues, I apologize, I have used all my professional life instruments Wild -Leica, and due to the terrible economic crisis that crosses my Country and although I know that it is not the right thing, I have no alternative to being able to update my equipment that is not operational since July 2014, since I could not update the ME firmware running version. I ask with much respect and waiting for your highest consideration, I would like to see the possibility that a colleague can send me the firmware file ME3.FW Version: v3.823, I have many problems with my instrument and my Leica distributor in my country, unfortunately, it has not been able to solve me, we are here in Venezuela experiencing a terrible social, political and economic crisis, that is why I appeal to you and your generosity, I do not have the financial means to pay for a firmware update Currently, I hope you understand me and can help me, thank you and may God bless you.
Pedro.

RSS

Where Thousands of Professional Land Surveyors, Students of Surveying and Educators are United through Collaborative Knowledge and Purpose.

Land Surveyor Forum - Community Discussions

Load parameter to TPS1100

Started by Maciej Michalak. Last reply by Jaybird Feb 7. 1 Reply

TPS1100 CODELIST

Started by Maciej Michalak. Last reply by Jaybird Feb 7. 1 Reply

Survey Data Miss match

Started by Mohammad Salem. Last reply by Mohammad Salem Aug 9, 2018. 1 Reply

TS06 Newbe Question

Started by John Graham Mar 2, 2018. 0 Replies

Leica CS20

Started by Tyler Springer. Last reply by Jaybird Sep 11, 2017. 3 Replies

RTK Leica GX1230 with GFU7(Siemens M20)

Started by Ragavan D. Last reply by Ragavan D Jul 29, 2017. 3 Replies

Weark Signal Error 1292 in Leica TPS 407

Started by Aminu Abdul. Last reply by Aminu Abdul May 22, 2017. 2 Replies

MS60 Signal

Started by leo zhang. Last reply by leo zhang Mar 22, 2017. 2 Replies

Leica TS12 power up warning message

Started by Daniel Wilt Mar 3, 2017. 0 Replies

TPS1000 Leica TC1100 Firmware

Started by Bernard Guillaume Jul 22, 2016. 0 Replies

recover deleted job in leica1200 rover

Started by Mali SGSI. Last reply by Mali SGSI Jul 10, 2016. 2 Replies

Liscad

Started by joseph Uy. Last reply by joseph Uy Dec 21, 2016. 2 Replies

Leica TCRA 1103 application licence code

Started by Jim.oneill7. Last reply by mike caffery Nov 16, 2018. 2 Replies

GEV97 GEV171 pinout

Started by Adil Nacsiri. Last reply by james mccann Jun 13, 2016. 1 Reply

Staking reports - Smartworx Viva

Started by Michael Villa Apr 20, 2016. 0 Replies

LISCAD Software Computations

Started by Will Voke. Last reply by joseph Uy Jul 3, 2016. 3 Replies

Tools,Apps and Quick Guides

DEDICATED TO THE MEMORY OF SKIP FARROW (1953-2015)


Help With Survey Equipment

Social Support For Equipment

Surveying Video Categories

Surveying Photo Categories

United States Hub Forums

International Surveyor Hub Forums

Resources for Company Owners

Land Surveyor Social Media

Surveyor Resources Collections

Getting Started & Newsletter

Featured Land Surveyor Hubs

Surveyor Birthdays

© 2019   © Created by Land Surveyors United   Powered by

Badges  |  Contact LSU  |  Privacy Policy  |  Terms of Service

Site Explorer