🌐 Show Forums for All Locations
Show the latest social shares
USA Surveying Forums
United States Surveyors
- Arizona
- Alabama
- Alaska
- Arkansas
- California
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New York
- North Carolina
- North Dakota
- New Mexico
- Oklahoma
- Ohio
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Texas
- Utah
- Vermont
- Virginia
- Washington
- Wyoming
- Wisconsin
- West Virginia
- USA Surveying Events
Asia Surveying Forums
Africa Surveying Forums
Middle East Surveying Forums
European Surveying Forums
South American Surveying Forums
Oceania Surveying Forums
Oceania Land Surveyors
Surveying Equipment Support Forums
Choose Your Equipment Type
Search Survey Photos
Search Surveying Photos by Tag
Add Posts, Surveying Photos, Videos and Articles to the Surveyor Community
Add Stuff to Community
Replies
Are you using Access or SCS900?
I've never had one freeze with Access but freezing and crashing happened with increasing frequency when using SCS900 after approx' 9 months of heavy use.
A regular message regarding memory was resolved eventually with either a firmware or software update (I don't recall precisely which).
Use Trimble Installation Manager to check that firmware version is up to date. The whole extended warranty thing is a bit of a pain and a somewhat cynical revenue stream for Trimble but given that both the firmware and software are continually being developed and improved it's a necessary evil.
Hi Robert
I'm thinking too about a memory problem, if all other functions of your controller are working good and it "freeze" itself randomly.
I suggest You to store jobs and pictures on the memory card, using an SD smallest than 4 GB. So, it allows to check if the issue is related with the NAND flash memory: if the controller still to crash randomly, the next step could be a total wipe out of the TSC-3 with a firmware re-install (and new set-up of Trimble Access, of course ...). In this case, before the reset, be sure You have a copy of every license/options number installed on your system. Otherwise, it could be difficult resume license by Trimble.
If You put a fresh memory card, format it with the controller tools, not with PC, to ensure it made correctly the file system.
Bye!
Carlo Alberto
Mine has been freezing for ages. Furthermore when connected to the computer it is more often than not an unrecognised device. Only a hard reboot fixes it. Then yesterday it thumbed its nose at the S8 and just would not connect. What would be handy from Trimble is a bag full of excuses I could use when the concrete is setting in the truck and twenty blokes are standing around waiting for my next setout point that will not be setout until maybe the next day or the day after that. It's back with Trimble at the moment for a second attempt at fixing its problems. Methinks the planned obsolescence is kicking in just when the warranty is up.