Can anyone plese tell me about the { mathamatically closed but geomatrically open traverse }

this is kind of open traversiong but i have a confusion in mathamatcly .plesea i need your opinion ./

This Content Originally Published by a land surveyor to Land Surveyors United Network

Views: 284

See Your Saved Posts Timeline

☇ Reply to this

Replies to This Discussion

Hi Sibgatullah ahamd najar,

 I am confused about your question,but I will try to answer it, if I am correct about what you are asking.

First there are two types of  Traverse,Open and Close. A Open is sometimes also referred as a Traverse Line. A Traverse Line also has Stations, like a Highway or railroad or say a Sewer Line. It however can begin at a known point, it can also end at a known point or a unknown point. If it begins at a known point and ends at a unknown point, it is not mathematically Closed   A  Closed Traverse are sometimes referred as a Traverse ,it does not have to have (continuous) Stations , it begins at a point and ends on that same point .   It is Closed both ways, A Open Traverse, that is Closed is extended to two known points , one at the beginning and one at the end ,this gives a mathematical check at the end of the Traverse. It is still a Open Traverse, but it's location is tied to two known points and this is how you can have a Mathematically closed but Geometrically open traverse. This makes it a closed link type or Closed.

Read pages 233 and 234, you can go to the top page 1 to load the complete book .

https://books.google.com/books?id=wbHbBwAAQBAJ&pg=PA233&lpg...

You can have both Open also. This is Mathematically Open and Geometrically Open traverse.

 Hi Sibgatullah ahamd najar,

I like to go over what I said  in my first reply.

 Like I said there are two types of Traverse Close and Open,but there are two categories of Close Traverse that exist: Polygon and Link. A mathematically closed and geometrically open is a closed link type,it is not a Open Traverse ,it is Closed. I am referring to what you stated in your question. So I like to clear this up. A Closed traverse Polygon it is customary  to measure the Interior Angles and each leg or line, is recorded as a separate distance of each leg or line. This is your choice if you like to use something different. like in Angle Right or Azimuth Traverse but Interior Angles are used as a system check or as in closing the Horizon. On a long Closed link (mathematically closed and geometrically open) and Open, (Math) Open/ (Geom) Open Traverse  ,closing the Horizon or customary Deflection Angles RT. and LT. are used In Route Surveys. Different method are used to check these angles. Also stationing is Plus in,this is a continuous measurement from POB or 0+00  or beginning Station to the end of the Traverse line also stationing is repeated in intervals,as in 1+00,2+00,3+00,this is used as it is one line with PI's. Distances can be used on each line ,if stationing is not required. Do not confuse continuous Stationing with Traverse Stations as in Traverse Points Stations that are used in Closed or none Route Surveys where each leg or line is measured separate.

Also for Link Closed Traverse (Closed/Open) must finish upon another station that has a positional accuracy equal to or greater than that of the starting point location and must have a closing reference direction. This is the one you asked about.

Open Traverses should be avoided because they offer no means of checking for errors and mistakes. If they are used,measurements must be repeated to guard against mistakes.

Also there are 5 methods of measuring Angles for a traverse.

1.Compass Bearing, 2.Interior Angles, 3. Angles to the Right, 4.Deflection Angles ,right or left,

5. Azimuths

And 2 methods of measuring.

1.Measuring each leg or line of the traverse.

2.A continuous measurement  from the beginning to the end of the traverse.

I hope this answers your question.

RSS

Where Thousands of Professional Land Surveyors, Students of Surveying and Educators are United through Collaborative Knowledge and Purpose.

Land Surveyors Forum

modern method of stereo model

Started by shree ram bhandari in Surveying Documents. Last reply by ⚡Survenator⌁ 9 hours ago. 1 Reply

Survey Abstract Coordinates

Started by John J Rodriquez in Surveying Best Practices. Last reply by Donald E Robinson, PLS, CFS yesterday. 16 Replies

Control surveying problem

Started by shree ram bhandari in Land Surveying Jobs. Last reply by Billy Brooks on Saturday. 11 Replies

Magnetic North Update

Started by Billy Brooks in Surveying Best Practices. Last reply by Billy Brooks Feb 6. 2 Replies

AERIAL STEREOSCOPY

Started by Lalith Senanayake in Surveying Related Links. Last reply by shree ram bhandari Feb 12. 4 Replies

Job Quotation

Started by Nitesh Shrestha in Land Surveying Jobs. Last reply by Nitesh Shrestha Jan 21. 3 Replies

Survey under tree canopy

Started by Massimo in Surveying Best Practices. Last reply by Maurice Heter on Saturday. 7 Replies

Mean Sea Level (MSL)

Started by Chuck Turlington in Geospatial Industry Types. Last reply by Kim Noblitt Jan 17. 6 Replies

Surface pro

Started by Malik in Surveying Field Tips and Tricks. Last reply by Kevin D. Allen Jan 7. 5 Replies

ROOF PEAK SURVEY

Started by Mthulisi Mloyi in Professional Advice for New Surveyors. Last reply by ⚡Survenator⌁ Jan 4. 2 Replies

Tools,Apps and Quick Guides

DEDICATED TO THE MEMORY OF SKIP FARROW (1953-2015)


Help With Survey Equipment

Social Support For Equipment

Surveying Video Categories

Surveying Photo Categories

United States Hub Forums

International Surveyor Hub Forums

Resources for Company Owners

Land Surveyor Social Media

Surveyor Resources Collections

Getting Started & Newsletter

Featured Land Surveyor Hubs

Surveyor Birthdays

© 2019   © Created by Land Surveyors United   Powered by

Badges  |  Contact LSU  |  Privacy Policy  |  Terms of Service

Site Explorer