Land Surveyor Community Forum

Hi All

I have an older Hiper + receiver that will only track 2 satellites for reasons unkown to me, I thought I might try to re-install the firmware however Topcon does not seem to have it on their web site that I could find, has anyone else had this happen and if so did you manage to correct it ?

Thanks 

Al

You need to be a member of Land Surveyors United 🗺 Global Land Surveying Community to add thoughts!

Join Land Surveyors United 🗺 Global Land Surveying Community

Email me when people reply –

Replies

  • Another check, Al:

    - have You seen if the satellite's position (both SATs are tracked ...) is currently updated in skyplot screen or Azimuth and Elevation are frozen (wait for few minutes)?

    - date and time showed in "Status" (TRU) are correct?

    Sometimes it seems the receiver is tracking, but is locked ....

    Bye

    Carlo Alberto

    • Hi 

      I could see the specs and setting for the gps receiver on the laptop however while tracking the two satellites I was using the field controller and when attempting to access the sky plot it says receiving invalid data from the receiver and shows nothing on the sky plot, I can see that it is tracking 2 sats on my Survey Pro survey controller, I did not try hooking the receiver to the laptop while it was outside, I will give that a try and post the results 

      Thanks for the input 

      Al

       

      • Al, I've got ...

        Do You need TRU for WinMobile? So, You can check better the receiver on the field ...

        If You need it, I send the link to my GoogleDrive folder.

        All the best

        Carlo Alberto

  • Thanks for your reply
    I tried the factory reset and it did connect with Topcon Reiceiver utility ok as I able to look at all the specs and setting
    Al
  • Hi Al!

    Do You have NVRAM reset? 

    When You connect the Hiper with PC-CDU, do the receiver answer correctly?

    Bye

    Carlo Alberto

  • Hi Al,

    I also have/had old Ashtech/Sokkia receivers from 1998, some of the first dual freq units out there.  8 or 9 years ago they also quit getting more than two or three sats.  I was told by tech support that the firmware was going out of date as newer sats replaced the older ones.  It would have been several thousand dollars to put new boards in them... sooo I have an old GPS receiver on the book shelf next to the Gurley Mountain Transit...   Bottom line, You might just have your first modern survey relic.. 

    Good Luck,

    Kevin

    • How long till my Topcon GR-3 becomes relic??? Sir can you have any clue.

    • Thanks for your reply, I guess I will just add them to my other obsolete gps gear (Epoch 35 system ) will make a great door stop 

      Thanks

      Al

       

      • That is the problem with anything electronic, it becomes obsolete faster than you think and that is the reason I love optical instruments as they seem to be timeless line my 32 year old Swiss made NAK2 level 

        Al 

This reply was deleted.

Featured Discussions

Latest Posts

TIP: Install the Web Archive Extension to Find Pages That Moved

We have put countless hours into the task of trying to make sure that all pages in the new platform are still at the same URL so that things don't go missing.  However, there will be times when you'll see a Missing Page Error. Chrome extension To the Rescue! Install the Wayback Machine Chrome extension in your browser.  When you reach a page that is no longer available, click your WayBack Machine extension and it will search for old versions of the page you were looking for.   We also have a…

Read more…
0 Replies

Autocad civil 3d Pland & Profile sheets scale problem on A4 paper

Dear All,                  I am facing problem while creating Plan & Profile and Cross Section Sheets on A4 Paper in Imperial templates. Can any body help me to solve this problem. I want to show 3200 foot Plan and profile on A4 sheet. I tried all scales but graphics displays too big in plan and profile sheets. Please guide me what scale i use in plan and profile scale for A4 paper. I am uploading project files. i am using 1"=200'                   Thnaks,                    Muhammad Junaid  …

Read more…
0 Replies