Replies to This Discussion

Permalink Reply by Mike Davis on October 10, 2018 at 5:57pm

Are you using an internal battery or the big red external "Brick" battery ?

• ▶ Reply

Permalink Reply by Slobodan Mladenovic on October 11, 2018 at 1:43am

internal one. i`ve tried several different ones and nothing.

• ▶ Reply

Permalink Reply by Raymond C. Smith Jr., LLS on October 10, 2018 at 7:34pm

I have a 1205 and have never encountered that problem.  Update firmware and software.  See if that fixes it.  If not, a trip to the service technician is in order.  Good luck!

I have a Gurley transit available, if that helps! No power, no software... ahh, the good old days.  ;)

Ray Smith

Surveysmith Land Surveying

• ▶ Reply

Permalink Reply by Paul Burke on October 10, 2018 at 9:53pm

Did it get wet? Did you try a different battery? 

• ▶ Reply

Permalink Reply by Slobodan Mladenovic on October 11, 2018 at 1:45am

it didn't get wet. yes i tried many different battery's,and nothing again. i tried connecting to pc but it was unable to connect.

• ▶ Reply

Permalink Reply by Slobodan Mladenovic on October 11, 2018 at 1:47am

i returned it to the seller. thank's to all of you for your help.

• ▶ Reply

Permalink Reply by khaldoun azzazi on October 11, 2018 at 3:29am

dear

reboot the totalstation by using USB connection to computer and update software

thannks

khaldoun 

• ▶ Reply

Permalink Reply by Sander Laurant on October 12, 2018 at 4:42am

maybe this will help?

Info TPS1200/TS30/TM30: Format NVRAM (HGA-3766 / 01.10.10)Info TPS1200/TS30/TM30: Format NVRAM (HGA-3766 / 01.10.10)==============================

Required Tools:---------------
- Fully loaded battery (GEB211)- CF-Card reader

Update Procedure:-----------------
- Copy the FormatNVRAM to the root directory of the CF-Card- Insert the CF-Card into the TPS instrument- switch-on the TPS instrument
Note:-----
- After a successful format of the NVRAM the FormatNVRAM file will be automatically deleted by the system.

============================================================

https://rplstoday.com/community/software-cad-mapping/leica-trcp1203...

• ▶ Reply

Permalink Reply by James Ranke on October 15, 2018 at 8:44pm

Hope it is on a Service Contract. and insured the TCR 1200 series instruments are more than 10 Years old and the repair parts for them are no longer available. Have one that the EDM board went out and it is a $20000 boat anchor.

• ▶ Reply

Permalink Reply by Slobodan Mladenovic on October 16, 2018 at 1:52am

it was a private seller,but an honest one. I returned it to him. 

• ▶ Reply

Permalink Reply by Reza on October 18, 2018 at 4:11am

well i think your calibration date was expired i faced this problem many times.

• ▶ Reply

Permalink Reply by Reza on October 18, 2018 at 4:13am

you should go for colibration i know my friend

• ▶ Reply