Show us why the public should always call a land surveyor

Where are you surveying?


🌐 Show Forums for All Locations
Land Surveyor Community

Land Surveyor

Hey guys 

I have done a survey 4 months ago, but for accuracy proposes when I repeat it again with tow kinds of prism (in total station menu was selected just mini prism).

1 Lieca round prism

2 lieca mini prism 

But the result shown me the objects relocation than preveus work, in none systematic manner, a building corner the same location the other deffren or have skew than preveus work or other building in correct location in which was read a complete building by the same prism mini or round. 

Any suggestion or ideas?

Thanks

You need to be a member of Land Surveyors United - Global Surveying Community to add thoughts!

Join Land Surveyors United - Global Surveying Community

Votes: 0
Email me when people reply –

Replies

  • Land Surveyor

    The mini and the regular circle prism should have the same accuracy but the 360 degree prisms are typically 6" or 8" rated so aren't advisable for long traverses

  • Land Surveyor

    Hi Mohammad!

    On the prism's mount You can read the modelname.

    If You are using Leica prism, it may be:

    1201346654?profile=original

    Obviously, You must input the proper prism's constant at the beginning of the survey.

    Otherwise, the distance will be affect by wrong offset.

    Bye!

    Carlo Alberto

  • Seeking Employment
    I agree with Grabwell Fundira above. A large prism offset is normally -30mm. It is generally to your advantage to use the same type of equipment when retracing an as built survey. MINI PRISMS ALL HAVE DIFFERENT OFFSETS THAN A LARGER PRISM. YOU MUST CHANGE THE SIZE OF THE OFFSET TO GET THE CORRECT ANSWER.
  • GeoEducator

    Set up test locations (possibly inside) and check everything periodically 

  • Land Surveyor

    your prism constant is very valid.Normally a -30mm constant is applied for large prisms.A small prism has a different prism.

  • Land Surveyor
    Hellooo salem,
    Acha swal kiya h aapne... bahut ae log is ka shikar hte hain pr pta na hone ki wjah se loig galat smjhne lgte hain.... ha ye sahi h ki sahi prism type na dalne bahut fark pdta h.
    Jaisa prism type aap use kr rhe ho wahi prism type machine e seected b chahiye.
    Or agr maloom krna ho ki actually prism constent kitna h toi uys ke .... field me total station ke aas pas prism lga kr machine se direct distance measure kre or use distance ko measuring tape se check kro... jo diffrence hoga wo prism coinstent hipiga
  • Land Surveyor
    Hey there are three kinds of prism in leica TS
    1 mini (17.5mm)
    2 round (34 mm)
    3 mini round(0)
  • Land Surveyor

    Hello Mohammad,

    It's wise to check the prism's you are using.

    Be aware of the fact that all the Leica prism's incorporate a standard difference of -/-34,4mm, which is regarded as Leica 0 (zero) value.

    So I would like to propose a small test with 3 tripods in line. 1--2--3.

    Take a distance measurement from 1 to 2 plus 1 to 3.

    After that that set up on 2, and measure the distance to 1 and 3.

    Compare the distances. 

    The first distance uses only 1x the prism constant value. When you set up from position 2 it's using 2x the prism constant value.

    If possible use a seccond total station to,eleminate system failures.

    hope this helps.

    you can always define a new prism name + constant value in your instrument settings.

    Regards, Peter

  • Land Surveyor

    Yes. different prisms have different offsets,  Is normally written on the prism. Leica round is 0mm (or -30mm) to other manufacturers

This reply was deleted.

Answer As your Facebook Page

Global Surveyor Forum

Latest Discussions by Category

How to Utilize Surveyor Forums

How to use Forums
Our forums on Land Surveyors United are here to be used as much for finding help with problems in the field as the are for you to express your opinions on anything that has to do with land surveying in general. Feel free to share anything that is on your mind, as long as it isn't meant to damage another member's reputation. Please keep it clean and help insure that everyone has the opportunity to enjoy the benefits of being part of a community that grows together.

We are committed to allowing freedom of expression for all of our members, and that includes maintaining a safe space for people with opposing views to express themselves. We get posts from all over the country and even the globe, so needless to say, people come with different viewpoints on lad surveying practices and processes. We see this diversity and variety as a real strength-- dialogue and debate are an integral part of the educational process, as well as an important tool in exploring different sides of complex issues.

All Community Hubs inside the community have their own forum for asking specific questions to other surveyors, by location, equipment type, etc.

Topics by Tags

Monthly Archives

Global Forums

Add Your Expertise

🌐 Explore Forums Based on Location

Blog Topics by Tags

Monthly Archives