As we know a typical GPS setup needs a base and rover. The Base is setup in the known control point and the rover used for the surveys. Leica GS 15 GPS is taken as example in this post. It can be set up in 3 different methods for the GPS Surveying. They are
It will be described briefly how above mentioned system works.
In this method the small “L” shaped antenna is fixed in the base and rover. The following photos shows typical internal antenna. The range of coverage is around 2 km. This method is simple and fast but less coverage.read more http://www.gpslandsurveying.com/basic-methods-of-gnssgps-setup-or-m...
http://www.gpslandsurveying.com/basic-methods-of-gnssgps-setup-or-m...
This Content Originally Published by a land surveyor to Land Surveyors United Network
Views: 38
Subject Keywords:
Where Thousands of Professional Land Surveyors, Students of Surveying and Educators are United through Collaborative Knowledge and Purpose.
© 2018 © Created by Land Surveyors United
Powered by
Disclaimer: our moderators do not verify the accuracy of your postings and assume no responsibility for the contents therein.
Follow Land Surveyors United