Hi:

I have a GTS-4 which has served me well for a number of years. Recently, I now have problems getting it to switch on. When connected EITHER to the handle battery OR the 12v car battery adaptor (both of which are fully charged), the screen shows me "battery empty", which is clearly not the case.

Enough juice gets through to give me this permanent message. The screen works fine otherwise, beeping for a second and showing me the full panel, but then drops to the battery empty message.

Any suggestions?.

Santiago Chile

This Content Originally Published by a land surveyor to Land Surveyors United Network

Views: 65

See Your Saved Posts Timeline

Replies to This Discussion

Hi Grodon,

Over the years how much servicing was done to the Instrument. Has it been cleaned and all the 

electrical contacts been cleaned. It seems like corrosion from moisture maybe,over the years,

even kept dry ,it can built up.How many times has it got wet or worked in wet conditions.

There may be part that needs changing,but I first look at cleaning all the contacts. You said both power methods show the same results,so it maybe internal connections. I start where it is good  and trace it to the instrument, Do you have away to check volts,amps, and mil amps on the battery handle and the adapter .You may need to take it in for a service check and a tech look at it.

Thanks for the reply Billy and apologies for not answering sooner. I took the GTS-4 to the local TOPCON dealer in Santiago, Chile, and he gave me the same response. He passed it to a technical person whoc couldn't find the problem ( though I doubt he tried very hard). I last used the instrument over 18 months ago and it has been in its case ever since. Chile is a dry desert country and humidity is rarely a problem.

The Topcon dealer said the GTS-4 is obsolete and wanted to interest me in a new model, which for the times I use it, is out of the question.He mentioned that the circuit boards for that model would no longer be available.

However, if I could get a map of the circuit boards, that might help to locate the problem!

Thanks again,

Grodon Siddeley

  Hi Grodon, 

 I knew part of Chile is dry,but moisture may not be the problem. Did you try cleaning the contacts , with something like alcohol and q-tip then let it dry. There could be something very well wrong electrically. They always try to sell you another gun. I have a old TS, am  lucky that it is still okay.  But it works as well as a new one to me,and it is made a lot better than one you can buy. Sorry for your problem,maybe you can get it fixed anyway. It is hard to reason that somewhere there is not that part, in some warehouse somewhere.

 Stay in touch, glad to have met you.

Best Regards,

Billy

RSS

Where Thousands of Professional Land Surveyors, Students of Surveying and Educators are United through Collaborative Knowledge and Purpose.

Tools,Apps and Quick Guides

BMC logoSupport Us! +LandSurveyorsUnitedon Google+

Next Generation Land Surveyor Community Where Every Day is a Surveying Conference

© 2018   © Created by Land Surveyors United   Powered by

Badges  |  Contact LSU  |  Privacy Policy  |  Terms of Service