Software SDR

We've had a few inquiries as to how to install SDR Level 5.5 software, so I'm gonna break it down for you. Just follow these steps and you will be off to work in no time flat:

 

 

 









The following workflow will guide you in installing SDR Level 5 onto numerous data collection devices. Instructions for activating the software are at the end of the workflow. The workflow is applicable to SDR Level 5, version 5.5X. 


Allegro Installation
1. Establish a guest connection between the device and the computer via Microsoft ActiveSync.
2.  Place the SDR Level 5 CD into the computer’s CD drive.
3.  Select Install SDR Level 5.
4.  Select Install Allegro.
5.  Select OK on the message reporting a previous version has been found.
Note: You may or may not see this message.
6.  Select Next
7.  Select Yes to accept the terms of the license agreement.
8.  Select Next on the Setup Type.
9.  Select Yes on any messages reporting a previous version has been found.
Note: You may or may not see these messages.
10. Select Yes; to install to the default application directory.
Note: Select Yes even if you want to install to a storage card – you will be prompted for this later in the installation process.
11. The installation will begin.
12. Select OK when asked to check your device for additional steps.
13. Select Finish.
14. Select OK
15. On the Allegro, select Yes or Yes to All on any messages reporting a previous version is already installed.
Note: You may or may not see these messages.
16. Choose a storage location.
17. Select Next
18. Choose the applicable Market Configuration.
19. Select Finish
20. Double tap the My Computer icon on the Allegro desktop.
21. Double tap the C_Drive folder.
22. Double tap the Sokkia SDR folder.
23. Double tab the Setup.exe file.
24. Level 5 will be launched.
JETT ce Installation
1.  Establish a guest connection between the device and the computer via Microsoft ActiveSync.
2.  Place the SDR Level 5 CD into the computer’s CD drive.
3.  Select Install SDR Level 5.
4.  Select Install JETT ce.
5.  Select OK on the message reporting a previous version has been found.
Note: You may or may not see this message.
6.  Select Next
Your browser may not support display of this image.7.  Select Yes to accept the terms of the license agreement.
Your browser may not support display of this image.
8.  Select Next on the Setup Type.
9.  Select the language to install by checking the applicable box.
10. Select Next
11. Select Yes on any messages reporting a previous version has been found.
Note: You may or may not see these messages.
12. Select Yes to install to the default application directory.
Note: Select Yes even if you want to install to a storage card – you will be prompted for this later in the installation process.
13. The installation will begin.
14. Select OK when asked to check your device for additional steps.
15. Select Finish.
16. Select OK
17. Reboot the device by selecting Start | Programs | Warm Reboot.
18. If a storage card is present, you will be prompted to choose your storage location. If no storage card is present, it will automatically save the program to the memory.
19. If applicable, choose a storage location.
20. Select Next
21. After a few seconds, SDR Level 5 will be running on the device.
Pocket PC 
2003 Installation
1.  Establish a guest connection between the device and the computer via Microsoft ActiveSync.
2.  Place the SDR Level 5 CD into the computer’s CD drive.
3.  Select Install Pocket PC 2003.
4.  Select OK on the message reporting a previous version has been found.
Note: You may or may not see this message.
5.  Select Next.
6.  Select Yes to accept the terms of the license agreement.
7.  Select Next on the Setup Type.
8.  Select the language to install by checking the applicable box.
9.  Select Next.
10. Select Yes; on any messages reporting a previous version has been found.
Note: You may or may not see these messages.
11. Select Yes to install to the default application directory.
Note: Select Yes even if you want to install to a storage card – you will be prompted for this later in the installation process.
12. The installation will begin.
13. Select OK when asked to check your device for additional steps.
14. Select Finish
15. Select OK
16. One the device, select OK on any messages reporting a previous version is already installed.
Note: You may or may not see these messages.
17. Reboot the device.
18. If a storage card is present, you will be prompted to choose your storage location. If no storage card is present, it will automatically save the program to the memory.
19. If applicable, choose a storage location.
20. Select Next
21. After a few seconds, SDR Level 5 will be running on the device.
DAP CE5320 
Installation
1.  Establish a guest connection between the device and the computer via Microsoft ActiveSync.
2.  Place the SDR Level 5 CD into the computer’s CD drive.
3.  Select Install SDR Level 5.
4.  Select Install DAP Microflex CE5320.
5.  Select OK on the message reporting a previous version has been found.
Note: You may or may not see this message.
Your browser may not support display of this image.6.  Select Next
7.  Select Yes to accept the terms of the license agreement.
8.  Select Next on the Setup Type.
9.  Select the language to install by checking the applicable box.
10. Select Next
11. Select Yes on any messages reporting a previous version has been found.
Note: You may or may not see these messages.
12. Select Yes to install to the default application directory.
Note: Select Yes even if you want to install to a storage card – you will be prompted for this later in the installation process.
13. The installation will begin.
14. Select OK when asked to check your device for additional steps.
15. Select Finish.
16. SelectOK
17. One the DAP, select OK on any messages reporting a previous version is already installed.
Note: You may or may not see these messages.
18. Open the file explorer by tapping the Windows CE screen.
19. Select Style | Supervisor Mode.
20. Enter YIWT as the password.
21. Select OK
22. Double tap the Sokkia SDR folder.
23. Double tap theSetup.exe icon.
24. Choose a storage location if applicable.
25. Select Next
26. After a few seconds, SDR Level 5 will be running on the device.
SDR8100 
Installation

1.  Establish a guest connection between the device and the computer via Microsoft ActiveSync.
2.  Place the SDR Level 5 CD into the computer’s CD drive.
3.  Select Install SDR Level 5.
4.  Select Install SDR8100.
5.  Select OK on the message reporting a previous version has been found.
Note: You may or may not see this message.
6.  Select Next
7.  Select Yes to accept the terms of the license agreement.
8.  Select Next on the Setup Type.
9.  Select the language to install by checking the applicable box.
10. Select Next
11. Select Yes on any messages reporting a previous version has been found.
Note: You may or may not see these messages.
12. Select Yes to install to the default application directory.
Note: Select Yeseven if you want to install to a storage card – you will be prompted for this later in the installation process.
13. The installation will begin.
14. Select OK when asked to check your device for additional steps.
15. Select Finish.
16. Select OK
17. One the SDR8100, select OK on any messages reporting a previous version is already installed.
Note: You may or may not see these messages.
18. Select Start | Reboot.
19. Choose a storage location.
20. Select Next
21. After a few seconds, SDR Level 5 will be running on the device.

Find Similar Content by Clicking These Tags ☟
Subject Tags: JettCE, SDR, allegro, guide, how-to, installation, software, sokkia, support, tutorial

This Content Originally Published to Land Surveyors United Network

Views: 206

Replies to This Discussion

very helpful...thanks Justin

RSS

Probably the largest Surveyor to Surveyor network on planet Earth. Professional Surveyors Geosocial Network Frictionless GeoCollaboration

What You Missed

Muhammad Sajid promoted Malik Abdur Rehman's group Excel Spreadsheets for Surveyors
2 hours ago
Profile IconJames Barnett, J W Veatch, Alan Hastings and 4 more were featured
4 hours ago
Profile IconJames Jeffrey Ganem, Dave Doran, Tudor-Vlad Matei and 2 more joined Land Surveyors United
9 hours ago
Eric Jackson promoted Ty Olinghouse's group AutoCAD Tip of the day
11 hours ago
Pedro Hernandez joined Ty Olinghouse's group
12 hours ago
J W Veatch's discussion was featured
13 hours ago
Pedro Hernandez joined LSU Justin's group
13 hours ago
Profile IconThere are 1824 forum topics on Land Surveyors United
13 hours ago

Search and Find

follow us in feedly

Take this Page With You

QR Code for This Page: What is this?

Surveyor Goodies

© 2014   © Created by Land Surveyors United

Badges  |  Contact LSU  |  Privacy Policy  |  Terms of Service

Related Posts for Land Surveyors UnitedRelated Posts Plugin for Land Surveyors United Network ForumRelated Surveying Photos Land Surveyors United Live Support