➕Add a Discussion
➕Add a Blog Post
Find a Surveyor
Join a Hub
|*Apps Open In Window:
Am trying to use the old fashioned RTK with GSM. I use a GX1230 with Siemens M20 (GX1230 Tech Ref Manual lists M20 as a supported model). Connected the M20 to Port1, configured the Real Time Interface with Port1 and Siemens M20 that shows up by default in Smartworx with factory default AT commands. I create a Config Set for Rover, all done and Smartworx shows messages, 1. Config Set saved, 2. Port1: No response from GSM and 3.Port1: GSM Initialised. The SIM I use has both voice and data from the service provider. I do not have a Network RTK Infrastructure, so I am doing a Single Base to Single Rover RTK. Under Additional Rover Option, Accept Reference is "Any Received" and Ref Network is "None" (as I dont have a Network RTK Infrastructure).
Begin Survey, Press F3 CONEC, Screen shows Dialling 'mobile number', and immediately, it throws up 'Connection interrupted' error in Smartworx.
When I use AT commands on M20, I am able to call my mobile (rings) and from my mobile to the M20 unit, smartworx displays connection established. But its when I dial via smartworx, from Rover to Base, smartworx throws up this error almost immediately. Have struggled with it for 2 weeks.
Appreciate if you can throw some light. Thank you.
This Content Originally Published by a land surveyor to Land Surveyors United Network
I suppose the problem in cellular network operator, but may be I am wrong. I had problem: I struggled with the same problem about 2 years ago. I had leica 1230 GG and GFU24 (Siemens MC 75) through GSM channel . And I had the same message Port: Connection interrupted... The problem was in my cellular network operator because it didn't support CSD (Circuit Switched Data) - old tech. I changed operator, acquired old sim-card and spoke to mobile operator support about this problem. After 2 days my RTK had worked.
Thank you for the advice Vova. I will try.
I tried a few experiments but not successful. I was able to call my mobile from the M20 and from my mobile to M20. But it does not go beyond the handshake. Then I spoke to my GSM network operator - he said - "this CSD technology on M20 is very very old (2003, 2004). We have shifted to advanced systems on our Digital exchanges, therefore CSD with background WAP 1.0 is not supported by us now".
So that's how it turned up. :(