I bought a second-hand Leica TCRA1103+ total station and I am new to the Leica world, since I only had Sokkia instruments so far.
The total station I bought didn’t come with any PC program for the management of the data.
I am wondering what program I might use (the simplest the better) to manage the data with the Leica TCRA1103+ total station. What I need is a very basic program that allows me to do essentially the data transfer and namely I need:
Many thanks in advance,
This Content Originally Published by a land surveyor to Land Surveyors United Network
I wasn't actually looking for a survey software, but just for a small program that lets my PC talk with the total station and converts the GSI data (even to a CSV format would be fine, since I have Sokkia Spectrum Link that can do the CSV to DXF conversion).
I have tried Leica Survey Office but, apparently, it doesn't work properly on my Win10 64-bit computer (the Data Exchange module does work, but the Coordinate Editor module doesn't).
Thank you very much, Lars.
You are right. It works perfectly.
It was simpler than I thought. I just set up the conversion directly from the total station and then downloaded the ASCI file.
Many thanks and kind regards,