🌐 Show Forums for All Locations
Show the latest social shares
USA Surveying Forums
United States Surveyors
- Arizona
- Alabama
- Alaska
- Arkansas
- California
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New York
- North Carolina
- North Dakota
- New Mexico
- Oklahoma
- Ohio
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Texas
- Utah
- Vermont
- Virginia
- Washington
- Wyoming
- Wisconsin
- West Virginia
- USA Surveying Events
Asia Surveying Forums
Africa Surveying Forums
Middle East Surveying Forums
European Surveying Forums
South American Surveying Forums
Oceania Surveying Forums
Oceania Land Surveyors
Surveying Equipment Support Forums
Choose Your Equipment Type
Search Survey Photos
Search Surveying Photos by Tag
Add Posts, Surveying Photos, Videos and Articles to the Surveyor Community
Add Stuff to Community
Replies
It is difficult to read, but there is a character after "0+" in your Station Start column. That is probably causing your problem. I believe it should be entered as -0+00.042.
Generally, avoid this situation all together if possible. I try to never start alignments at 0+00 for this reason. Start them 1+00, 5+00, 1000+00, 5000+00, etc...
This should not be an issue. I've done negative stations many many times. The error message you see may not e related to your profile but may be an issue with your alignment. Try exporting to xml, deleting the alignment and reimport it. Make sure you do this in a copy just in case.
Change your stationing so its not negative.... This is basic... basic Civil CAD knowledge....
Is your starting station -0.042 or -0+04.2?? your screen shot is hard to read there.
Also, if that is happening you most likely have created your alignment backwards. There are tools in 3D Civil to correct that.