I am a new survey tech and I had a recent project that I shot in Missouri state plane west, but was in the central zone. My collector only allowed me to shoot in west as it was only setup to shoot in that zone. I now have it setup to shoot in central but I have taken over 4000 shots of this project in Missouri west zone. I am wondering if someone has a fix for me to use to correct the shots that I have taken in the west zone and convert them to central zone. I have tried to use corpscon 6.0 but it seems to not work. I am starting to get under the impression that I can't fix these shots from all the research that I have done and wasted a months worth of work. This is my last resort. If anyone can help me, it would be greatly appreciated.
This Content Originally Published by a land surveyor to Land Surveyors United Network
You can probably change the settings on the fly now that you have the new zone loaded. That is, the data is at the "real" location and you should be able to switch from zone to zone to Lat/Lon to state to state. If you have already deleted the job from your collector, you can set the zone back to the original zone, load the data, and then change the zone....
The data is not deleted. From what I understand, the Carlson software that I use may not be able to do this.
What is your Data collector Software? If it is Trimble Access and there have been no Translations it should be as simple as selecting the correct system. The GNSS data will defiantly move but the Robot or keyed in points may have to be dumped into CAD and moved manually. Hopefully there are points in common. OR go out with a new job in the correct system and measure your control points. Do at least 4, more is better spread-out evenly over the site if possible, like your setting control for Machine Control
and a word of caution: always keep the original data and backup your raw files. just in case your translate is bad, you'll want something to go back to. and it's always a good idea to write down what you did and how!
I am using Carlson at the moment. Soon to switch to MAGNET. I have several control points and an NGS benchmark that I have shot over again in central and west. They are all spread out. I am supposing that I will need to find a mean average of projection of all the control points that I have shot?
Thank you all for the input. I am overwhelmed at the responses in such a short period of time. To answer questions globally, the software that I am using is Carlson. As I knew already before I started the job, the state plane was in central, but since the collector only allowed me to shoot in west I figured that it knew my position and only allowed me to shoot in west. I now know that central was not added to the collector. My situation is that I have really no mentor at the office that I am working at and feel like I have been hacking surveys left and right. I have taken basic survey and records research at the school that I am attending. I am also currently taking advanced surveying and legal aspects. But I am still struggling with the concepts and GPS of modern survey. I am also nearly finished with a construction engineering degree but choose to do surveying because of the surveying community. The responses here have helped with that belief.
It seems that the biggest problem is that after I calculated a projection off the NGS benchmark, I converted all the shots but in MicroStation, the shots tend to rotate to the North. I have only used that NGS benchmark as my reference, but I have 5 other control points all along the job that I have shot in state plane west and central. I suppose what I would need now is an approach to using all these shots, like say, an average projection from all the points?
Thanks for your responses.
did you ever get your data sorted?
ok. cant seem to find an answer for you yet. reaching out to my survey network....
yeah, bringing it into Microstation will not prove helpful at thi stage in the game. You will need to either change the zone in your collector or change the zone in your office software, i.e., Trimble Business Center or Magnet or Carlson SurvPC. 3D GPS coordinates cannot be simply rotated in a CAD platform - it makes sense that stuff doesn't match up in Microstation.